A Few Unusual Questions — Looking for Some Advice ！ ：）

[Allen KE]

Hi everyone at Geotech!

I'm currently working on a personal project that combines a metal detector with an RC vehicle. I've run into a few technical challenges along the way, and I'm hoping to get some advice or ideas from the community.

Shielding and Interference Issues...

[Tec]

The ‘Wombat Pulsed Oscillation’ uses a mono coil and capacitor (tank circuit) oscillating freely, similar to a good old BFO or a ‘VLF’ detector.


Unlike a BFO or VLF detector, it uses a ‘time of flight’ chip, the TDC7200, to measure frequency and amplitude change with...

[stratiev_a]

Hi everyone,

I'm repairing an XP ADX 150 mainboard. The 10-pin IC located right next to the crystal , burned out after the coil cable was damaged.

The original IC markings are factory erased by XP.

Here are the PCB pin measurements without the IC installed:...

[moodz]

Aziz and myself have collaborated to bring you SPULE32 which is Aziz's coil modelling software.
He has kindly provided the original source code ( C, C++, ASM ) which originally was built for windows and I ( with AI help ) have ported to Javascript.
So to be clear Aziz did all the work and...

[Aziz]

Hi all,

we are really far from AGI (Artificial General Intelligence).
https://en.wikipedia.org/wiki/Artifi...l_intelligence

I have invented a most powerful drawing transfer method (for fine arts) a couple of years ago and it isn't published yet.
So all the...

[Altra]

The mono loops have a TX and RX winding which are fully coupled and not inductively balanced. The Tx/Rx are wound together. The Tx is 18awg tin plate stranded with pvc insulation(258uH 0.6R). The Rx is about 30awg single strand teflon or kynar insulation(228uH 6.0R). Inside the coil is a protection...

[eduardo1979]

Hello. I found this Russian forum of IDX-PRO PCB. The PCB had many mistakes and failures of some components. I corrected the PCB and added the missing components. I wish that we all take a look and give a chance on this project. Surely here in the forum there are people who would be interested in this...

[Qiaozhi]

The original Delta Pulse thread has a corruption in the database that is causing problems on page #152. I have closed the original thread and started this new one. Please continue the discussion here.

Carl is going to investigate the problem, but we're not hopeful that the database can...

[Uykusuz]

PIM-2 is digital version of Delta Pulse. You can obtain all documents at following link.

http://www.lugatek.com/forum/index.php?topic=150.0

Good luck ...

[ZED]

Thought i would share with you all the full schematics i made up for
the M/lab SD2000.Over the years with all the fiddling on the 2000
i did and the resulting hand drawn schematics,why not do the whole
thing and present it to those that have an interest.
I would like to give...