Pulse Delay Pot and LED Placement

[geoscash1]

Cuda delay - no response

I have a question that has arose since I am messing with my cuda. The delay has never worked correctly and or the added 10k pot
does absolutely nothing. I have tried it numerous different ways but still get no response from the pot.


Which or what is the correct way to wire in the second pot, anyone have a pic of which way is the correct position of the legs, 123, top or bottom of pot
or does it matter and also please see attached pic, I found this which looks to me like a discrepancy where the trim pot is wired. Is this correct, incorrect
or what the hey...

[Pin Head]

Hi, Just a stupid question here but what voltage of LED are you using? 12 volt?

[mohandes]

by satdaveuk Hi Sinclair The LED is directly wired between +...

Hi Sinclair
The LED is directly wired between + supply line and the junction between R35/R36
It mimics the audio responses perfectly providing your speaker load is 32 ohms as Barracuda manufacture...


hello sven
the second delay 10k is only connect pin1 from pot to 25k trimmer and pin 2 from pot under 470N cap (where the word delay stands)

i dont use 10k pot
i only use a 22k external pot instead of trimmer and next there instead of a 10k pot a wire bridge

it works in a wider spectrum

hi
i wanna make coil for it by 0.2mm wire in 20cm circle .how many winds need to turn?
regards

[bernte_one]

by satdaveuk Hi Sinclair The LED is directly wired between +...

Hi Sinclair
The LED is directly wired between + supply line and the junction between R35/R36
It mimics the audio responses perfectly providing your speaker load is 32 ohms as Barracuda manufacture...


hello sven
the second delay 10k is only connect pin1 from pot to 25k trimmer and pin 2 from pot under 470N cap (where the word delay stands)

i dont use 10k pot
i only use a 22k external pot instead of trimmer and next there instead of a 10k pot a wire bridge

it works in a wider spectrum

[SVEN1]

Just double checking placement of two items . Please let me know if correct.