Announcement

Collapse
No announcement yet.

A Single Coil TEM field metal detector with simultaneous transmit and recieve.

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • #46
    It's great to see you are still working on this project. If it's not sensitive info, I would love to see a schematic of the front end. Years ago I bought 10 of the LME49990's from Digikey. Like a fine wine I have been saving them for a special occasion. The LT1028's has a very close noise spec and still made.

    Thanks.

    Comment


    • #47
      Thanks Altra ....the circuit is not quite finalised yet but it is basically whats in the white paper. ...but here is hot off the press below I just asked the AI to solve the PI ferrous / non ferrous from the curves going into the ADC .. not entirely scientific just waving the targets around ... but its done and there is a clear ferrous channel ( orange ) and target ( blue ) .... the AI also calculated some taus .. but these look bogus to me.

      Click image for larger version

Name:	image.png
Views:	0
Size:	324.1 KB
ID:	454579​

      Comment

      Working...
      X