Announcement

Collapse
No announcement yet.

Threshold Pot doesn't work

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Carl-NC
    replied
    Many basic PI designs have a 500-1000 preamp gain. I often use a lower gain to improve settling speed for earlier sampling.

    Leave a comment:


  • h9361
    replied
    Originally posted by Carl-NC View Post
    That looks OK to me.
    Thank you for your replying.
    I have a fundamental question about preamp PI.
    I read your ITMD2 book, you told that we use a 1000 Gain for preamp of normal PI (without GB).
    But you and other are using a lower Gain for preamp gain on PI+GB.
    Sorry for my amatory question, because i am learning more about PI machine.

    Leave a comment:


  • Carl-NC
    replied
    That looks OK to me.

    Leave a comment:


  • h9361
    replied
    Originally posted by Carl-NC View Post
    The bandwidth is set by R20 and C15:

    BW = 1/(2 * π * R20 * C15) = 1/(2 * π * 2.2M * 10nF) = 1/0.138 = 7.23Hz.

    So if you change R20 to 1M the BW will be 15.9Hz. You will also need to change R25.

    It is not absolutely necessary to have 16Hz, you can change it to a lower or higher BW and see how that affects the target response.
    Dear Carl,
    I already added a GB to my HHD. Now, i am going to test your Bipolar GB method to my HHD.
    Is it possible to see the schematic and see that whether it has any error or not (specially 5532 part, negative/positive voltage output)?!
    The voltage level of my four sampling pulses is +5V.
    Thank you.
    Click image for larger version  Name:	preGB.jpg Views:	0 Size:	94.1 KB ID:	442789
    Last edited by h9361; 11-23-2025, 02:16 PM.

    Leave a comment:


  • h9361
    replied
    Originally posted by Carl-NC View Post
    The bandwidth is set by R20 and C15:

    BW = 1/(2 * π * R20 * C15) = 1/(2 * π * 2.2M * 10nF) = 1/0.138 = 7.23Hz.

    So if you change R20 to 1M the BW will be 15.9Hz. You will also need to change R25.

    It is not absolutely necessary to have 16Hz, you can change it to a lower or higher BW and see how that affects the target response.
    Hello Dear Carl
    I have a question about IMD2, chapter 8, Transmit-receiver Detector. Do you think the simple schematic can detect microvolt variation (high sensitivity) on amplitude of Signal?
    Thank you

    Leave a comment:


  • h9361
    replied
    Originally posted by Carl-NC View Post
    The bandwidth is set by R20 and C15:

    BW = 1/(2 * π * R20 * C15) = 1/(2 * π * 2.2M * 10nF) = 1/0.138 = 7.23Hz.

    So if you change R20 to 1M the BW will be 15.9Hz. You will also need to change R25.

    It is not absolutely necessary to have 16Hz, you can change it to a lower or higher BW and see how that affects the target response.
    Thank you for your valuable information.

    Leave a comment:


  • Carl-NC
    replied
    The bandwidth is set by R20 and C15:

    BW = 1/(2 * π * R20 * C15) = 1/(2 * π * 2.2M * 10nF) = 1/0.138 = 7.23Hz.

    So if you change R20 to 1M the BW will be 15.9Hz. You will also need to change R25.

    It is not absolutely necessary to have 16Hz, you can change it to a lower or higher BW and see how that affects the target response.

    Leave a comment:


  • h9361
    replied
    Originally posted by Carl-NC View Post
    I'll look into it later.
    Hello Dear Carl
    I hope you are passing good days.
    Please see the schematic, it belongs to Mr. Donald. He told me that its response frequency is 7Hz.
    I want to adjust it for using my HHD. As you told me, HHD response frequency is 16Hz.
    Is it possible to tell me which parts is better to be changed ( its values) for reaching the 16Hz?!
    Thank you.

    Click image for larger version

Name:	disc11.jpg
Views:	183
Size:	180.3 KB
ID:	441163

    Leave a comment:


  • Carl-NC
    replied
    I'll look into it later.

    Leave a comment:


  • h9361
    replied
    Originally posted by Carl-NC View Post
    The only pinpointer I know of that uses off-resonance is the Cache Pro by Intex Systems.
    Thank you.
    Dear Carl
    Have you ever tested search part from www.longrangelocators.com?
    I think the part is not working because it shows nothing for every keywords.

    Leave a comment:


  • Carl-NC
    replied
    The only pinpointer I know of that uses off-resonance is the Cache Pro by Intex Systems.

    Leave a comment:


  • h9361
    replied
    Originally posted by Carl-NC View Post
    This won't work. The raptor oscillator is "on-resonance" and can't be forced off-resonance.
    Dear Carl
    I have a question about Commercial pinpointer metal detector.
    Do you think its method is Off-resonance like in your book?
    Thanks

    Leave a comment:


  • Carl-NC
    replied
    This won't work. The raptor oscillator is "on-resonance" and can't be forced off-resonance.

    Leave a comment:


  • h9361
    replied
    Originally posted by Carl-NC View Post
    I'm aware of the problem.
    Hello
    Dear Carl
    Please forgive me for my question.
    Please consider Inside of metal detector ( second edition), p. 37, Off-resonance.
    I want to change its oscillator with oscillator of raptor ( attached).

    Click image for larger version

Name:	raptor.jpg
Views:	250
Size:	20.4 KB
ID:	440060
    Do you think the schematic of your off-resonance need to be changed if i connect output of raptor-oscillator to 1n914 in your off-resonance schematic?

    Leave a comment:


  • Carl-NC
    replied
    I'm aware of the problem.

    Leave a comment:

Working...
X