Announcement

Collapse
No announcement yet.

Threshold Pot doesn't work

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • waltr
    replied
    Does the op-amp output DC Voltage change when you turn the Threshold pot?
    This is what the pot does, creates a DC offset on the op-amp output.


    Thanks for creating a new thread in HH1. Now all of your questions and the answers will be in one thread and easier to follow.

    Leave a comment:


  • h9361
    started a topic Threshold Pot doesn't work

    Threshold Pot doesn't work

    Hello
    Dear All
    Before everything, i have to thank Mr. Walter, Carl and Surfdetector for their helps.
    Now, i'm using HH1-Rev-C2-VCO version. First, i had a poor detection problem but finally i could solve it via Mr. Carl and Walter helping.
    Anyway, now i have an another problem and that is my R31 (threshold pot) doesn't affect over Audio.
    I checked values of R30, R31, R32 and R33 and all of them is true. According to users suggestion, i checked TP9,TP5 and TP4 by DVM, voltage of the points are 0.
    Do you have any suggestion for check?
    Thanks.
Working...
X