Announcement
Collapse
No announcement yet.
Threshold Pot doesn't work
Collapse
X
-
Only receiving RX without any TX.Originally posted by Carl-NC View Post
Are you wanting an RX coil that can receive 2 frequencies, or a TX coil that can generate 2 frequencies? What you show cannot oscillate, it has no feedback mechanism. Otherwise, I have no experience trying to do what I think you want to do.Attached FilesLast edited by h9361; 01-27-2026, 09:02 PM.
Leave a comment:
-
Are you wanting an RX coil that can receive 2 frequencies, or a TX coil that can generate 2 frequencies? What you show cannot oscillate, it has no feedback mechanism. Otherwise, I have no experience trying to do what I think you want to do.Originally posted by h9361 View PostThis model can receive two frequencies Simultaneously.
Is it possible to tell me your opinion?
Leave a comment:
-
Thanks.Originally posted by Carl-NC View PostSorry, I have no idea. ITMD2 and ITMD3 present two different squegging oscillators which effectively run at two frequencies, but they are gated oscillators and that is not what you want. I suggest you ask on a general electronics forum. My personal favorites are
allaboutcircuits.com
electronics.stackexchange.com
electro-tech-online.com
I had a talk, some suggested me coupling mode.
F1=L1+C1
F2=(L1+L2)+C2
This model can receive two frequencies Simultaneously.
Is it possible to tell me your opinion?
Thanks.
Leave a comment:
-
Sorry, I have no idea. ITMD2 and ITMD3 present two different squegging oscillators which effectively run at two frequencies, but they are gated oscillators and that is not what you want. I suggest you ask on a general electronics forum. My personal favorites are
allaboutcircuits.com
electronics.stackexchange.com
electro-tech-online.com
Leave a comment:
-
Originally posted by Carl-NC View PostWithout a lot of study I can't be sure of how that circuit works, so I can't offer any feedback.Dear carlOriginally posted by Carl-NC View PostWithout a lot of study I can't be sure of how that circuit works, so I can't offer any feedback.
Is it possible to help me about post #606?
Can you help me how i can use a coil with two different tank capacitors for receiving two different frequencies simultaneously?
Leave a comment:
-
Dear carl
Is it possible to help me about post #606?
Can you help me how i can use a coil with two different tank capacitors for receiving two different frequencies simultaneously?
Leave a comment:
-
Thanks.Originally posted by nejdet View Post
The answer is: neither one nor the other frequency. The two capacitors are connected in parallel, therefore the resonant frequency is different!
Do you have any simple solution for using two frequency as simultaneously in the schematic?
Leave a comment:
-
The answer is: neither one nor the other frequency. The two capacitors are connected in parallel, therefore the resonant frequency is different!Originally posted by h9361 View Post
Hello dear carl
I have a basic question about resonance frequency.
I read your book and you only pointed to multi frequency only via a overall diagram. I have a request, for better understanding.
Please see attached, there is a coil(L1) and i want to connect it simultaneously to two TANK capacitors (C1 and C2).
Consider following
L1 = 1mH
C1= 10n
C2= 22n
As a result,
L1 + C1= 35khz
L1 + C2 = 23khz
My question is, do you think this connection can simultaneously receive both 35 and 23 khz?
Leave a comment:
-
Hello dear carlOriginally posted by Carl-NC View PostWithout a lot of study I can't be sure of how that circuit works, so I can't offer any feedback.
I have a basic question about resonance frequency.
I read your book and you only pointed to multi frequency only via a overall diagram. I have a request, for better understanding.
Please see attached, there is a coil(L1) and i want to connect it simultaneously to two TANK capacitors (C1 and C2).
Consider following
L1 = 1mH
C1= 10n
C2= 22n
As a result,
L1 + C1= 35khz
L1 + C2 = 23khz
My question is, do you think this connection can simultaneously receive both 35 and 23 khz?
Last edited by h9361; 01-25-2026, 10:20 AM.
Leave a comment:
-
Without a lot of study I can't be sure of how that circuit works, so I can't offer any feedback.
Leave a comment:
-
Thank you.Originally posted by Carl-NC View PostRemove D20 & R75. Q17 is OK.
Dear Carl, i want to design PCB of IDX pro (two tones).
So, i checked Mr. Walter's two tones PCB. He used the Red diode and it is connected to U2
in12.
Do you think i need to put it on my PCB?
Another question, a friend recommended me to add a 680K resistor (red 680). Do you think it is better to add it?
Leave a comment:
Leave a comment: