Originally posted by h9361
View Post
Announcement
Collapse
No announcement yet.
Threshold Pot doesn't work
Collapse
X
-
yes, i put a gap.
No, i did not re-nulling coil with shield.
For re-nulling, do you think i should change number turn of buck coil?
Leave a comment:
-
Pictures of how the shield is done.
Is there a gap to prevent eddy current within the shield?
Did you try re-nulling the coils with the shield?
Leave a comment:
-
Hello
Dear Walter
As you know, i have built a concentric coil.
Today, i tried to add a shield (graphite or foil) to both inner and outer coil but i had a problem.
As soon as connecting shield to ground (+B), my TP4 will be broken.
This is TP4 without shield
And this is with shield connection
Do you think it's normal for concentric coil?
Thank you.
Leave a comment:
-
I use 3S LiPo with 1200 to 1800mA-Hr capacity.
Is that 2200mAmp-Hour capacity? If so then simply divide that by average current draw.
2200/100 = 22 hours but divide in half to be safe for the Li (they die if over discharged) so easily 11 hours of operation.
Leave a comment:
-
Hello
Dear Walter
Please forgive me for my questions.
Can you tell me your battery amperage and maximum hour that you had experienced?
As you know, HHD consuming is approximately 100mA.
I'm going to series three 3.7V-2200mA batteries, but i can't estimate its maximum hour for continuous working.
Leave a comment:
-
Hello
Dear Walter
I have a question about your experience with concentric/DD coil.
Can you tell me what type cable you used between coil and unit? For exp, Microphone ?!
Leave a comment:
-
look Delta Pulse VU meter resistor connected. a 'snow' sign is meant 'tuned value'.Originally posted by h9361 View PostI think your means is that, is it correct?
[ATTACH]58198[/ATTACH]Attached Files
Leave a comment:
-
Thanks dear Carl.Originally posted by Carl-NC View PostIncrease the value of R36 (the one that drives the meter) until it does what you want. You might also need a resistor in parallel with the meter, I would start with 10k.
Please see attached, do you think position of the 10K is correct?
Leave a comment:
-
Increase the value of R36 (the one that drives the meter) until it does what you want. You might also need a resistor in parallel with the meter, I would start with 10k.
Leave a comment:
Leave a comment: