Announcement

Collapse
No announcement yet.

Wanted "ADMIRAL"

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • dumivan
    replied
    I only have a response to the Rx pendulum until I have a Tx for help

    Leave a comment:


  • dumivan
    replied
    I have problem

    Leave a comment:


  • bernte_one
    replied
    ich take 3 cells 14500 liIon with have around 12V full charged

    Leave a comment:


  • Mivassart
    replied
    Hi friends, can someone tell what is the max voltage for Admiral MD? Thanks!

    Leave a comment:


  • bernte_one
    replied
    newer tesoro coils have Ratio from 1mH tx -14mH rx (4pin connector)

    older models 6 and 6,5 (5pin connector)

    calculation for expexted values is not difficult
    Ratio of frequencies from tx and rx should be 1: 1,2

    example
    1mH and 330nf are 8,76khz (TX)
    14mh and 22nf are 9,7khz (RX)

    if i take 8,76 * 1,2 i achieve 10,4 khz so my 14mh with 22nf is not perfect after calculation
    so i can Change L of coil or caps size

    if i take 10,5mh and 22nf i achieve 10,47khz tha would be good but the induced voltage can be lower
    so i try more mH and other cap size

    if i take 15nf and 15mh i get 10,6khz this is a good choice

    Leave a comment:


  • CDI
    replied
    Originally posted by homefire View Post
    Can't find any figures for Coil Data other then the one post 8Khz? Would this detector lend it's self to be bumped to like 20Khz ?
    Mmmm yes, i tried coil for Tesoro Tejon and work's very good with this machine, but i can't remember capacitor's for rx and tx.
    Also, tried rx from tgsl, which is 6.5mh and work good. So, 1mh for tx, 6.5 for rx, i posted video sometimes ago with those setup, coil was 8.5 inch.

    Leave a comment:


  • homefire
    replied
    Can't find any figures for Coil Data other then the one post 8Khz? Would this detector lend it's self to be bumped to like 20Khz ?

    Leave a comment:


  • bernte_one
    replied
    pls dont ask for files every months, just go back some postings and you will find what you search
    open zip Container and have fun

    Leave a comment:


  • Belac
    replied
    [email protected]

    Leave a comment:


  • Belac
    replied
    Hey. can u send me Admiral file i want to bild that detector. Thx. Alex

    Leave a comment:


  • bernte_one
    replied
    i got an Admiral pcb from user bandito
    seems all work ok, but i have to test different coil
    as i remind i get good results with
    0,4mm 1mH / 0,2mm 12mH

    fine Tuning by combining capacitor on rx / tx stage
    around 8khz for TX side

    Leave a comment:


  • CDI
    replied
    My Admiral build with 8.5 inch DD coil.
    Coil specs is a little bit changed cause i used rx coil from TGSL...
    Really good on coin shooting, like it. Also, in video is shown test with mineralised ceramic, brick and hotrock.
    TX 1mh
    RX 6.5mh
    Click image for larger version

Name:	20170712_171559.jpg
Views:	1
Size:	580.1 KB
ID:	348984
    Click image for larger version

Name:	20170712_171500.jpg
Views:	1
Size:	1.04 MB
ID:	348985

    Leave a comment:


  • CDI
    replied
    Bernte, what was main difference in performance between S.M.W and Admiral? I know they are prety similiar machines, so result should be almost the same...but just want to hear from someone who maked both.
    Do u have maybe 2 tone mod and how it work's?

    Leave a comment:


  • bandito
    replied
    Everything is corrected, you can breathe easy

    Leave a comment:


  • bernte_one
    replied
    hello bandito,

    i wrote to you over ebay, not ok to link my Video for your Promotion
    i also make better one where you can see real Performance, but without any permission it is not ok, ask next time

    Leave a comment:

Working...
X