SMT Bandito Info/Build

[ArchibaldSTM]

Film or ceramic will work.

Thank you! That's exactly what I wanted to hear. For KT315. I have non-polar electrolytic ones. It's not about that. Meaning in size. I have a board completely on SMD. So I want to put ceramics so that everything is the same. I don't like it when something sticks out of the board.

[kt315]

ok... understood... you may find ceramics at digital modern but trash boards, but their voltage is unknown. on Tesoro boards made on SMD
they used non-polar electrolytics. btw your layout has big spaces... meaning in size? you sure can put electrolitics there.

[ArchibaldSTM]

I'm still working on the board, this is not the final version. I just wanted to know if it is possible to replace non-polar capacitors. Yes, just in case

[MartyJ1963]

@ArchibaldSTM,,,do you have the layout of the SMD pcb that you posted? Any chance you could post it if you have please? Thanks, Regards, Marty.

[Toros]

Marty,
This board is slightly modified from the original on the first page.

[MartyJ1963]

@toros, Thanks. Is there a layout fr this board please? Regards, Marty.

[ArchibaldSTM]

do you have the layout of the SMD pcb that you posted?

Yes, of course... This is the board from the first page, only slightly changed. I used the 7660 microcircuit in the negative voltage source and changed some ratings in the filters. I compared the board with the scheme, but have not collected it yet. Designed for self-manufacturing, not factory.