TGSL - EDU , new boards and kits

[compadre]

I can confirm this is correct for original Tesoro coil (white cased widescan), connected mine up and working nice !

Yes Silverdog, you are right my Tgsl is now working fine, i change the two LM 393 this was the proplem
thanks for help
compadre

[silverdog]

I believe this is correct, your 2 bare wires can be twisted together

I will be trying it myself tonight, time permitting

http://www.geotech1.com/forums/showt...hlight=unknown

I can confirm this is correct for original Tesoro coil (white cased widescan), connected mine up and working nice !

[bernte_one]

Hy again
now i find out that my all metal mode does not work, maybe thats the reason why i get no deep on the original coil, where can i look at first
please help
thanks compadre

mybe you have wrong linked the all metal/ disc switch
you think you are in all metal but it is disc mode?

had the problem that one mode not works too but that was after i had shiel my coil complete before shielding it works in both modes for myself i thought the error was that i have used to strong alu tape and maybe there is somethink wrong linked in the coil

so check first your switch and then check the coil wiring

would answer you in german but this forum is english it´s better for all users

[compadre]

Hy again
now i find out that my all metal mode does not work, maybe thats the reason why i get no deep on the original coil, where can i look at first
please help
thanks compadre

[bernte_one]

maybe it can help

http://fotoalbum.web.de/gast/bernd.marten2/TGSL

viel glück

[compadre]

I believe this is correct, your 2 bare wires can be twisted together

I will be trying it myself tonight, time permitting

http://www.geotech1.com/forums/showt...hlight=unknown

thank you silverdog
again the same proplem only 5-6 cm deep

[silverdog]

I believe this is correct, your 2 bare wires can be twisted together

I will be trying it myself tonight, time permitting

http://www.geotech1.com/forums/showthread.php?t=11421&highlight=unknown

[compadre]

Tgsl-Edu

Hy i finished my tgsl edu black version from silverdog , i used a round concentic white original 5 pin coil
the proplem is, i get no deep only 5cm for 1 euro coin disc is working but not good.
the wires are grey,purple,blue,orange and two bare wires.
what is the right way to wire up this tesoro coil
please help
regards compadre

[habitbraker]

Yes, thats too much!

[bernte_one]

hello bernte!
I see youre from EU too. You got your original coil from ebay? What was shipping costs? What was the price of coil?

too much (used condition but the best price i could find)
85 € for coil
plus 15 € for shipping from uk to germany

search at ebay.co.uk

[woody]

hello woody

no worry with my selfmade coil i got similar bad results
before shielding after shielding i could raise the distance up to 25cm for a 1€uro piece
and not perfect nulled too only arranged so that i got the highest distance
but my coil the disc dont work before i shield it does works
no matter the next weeks i use the original coil
maybe later i try a new diy coil

p.s.
are you the woody who sells me his 9*8 web coil on ebay?

No. But
maybe I'll try again on diy coil

[habitbraker]

hello bernte!
I see youre from EU too. You got your original coil from ebay? What was shipping costs? What was the price of coil?

[bernte_one]

hello woody

no worry with my selfmade coil i got similar bad results
before shielding after shielding i could raise the distance up to 25cm for a 1€uro piece
and not perfect nulled too only arranged so that i got the highest distance
but my coil the disc dont work before i shield it does works
no matter the next weeks i use the original coil
maybe later i try a new diy coil

p.s.
are you the woody who sells me his 9*8 web coil on ebay?

[woody]

My TGSL-EDU kit came yesterday first time I've pulled a sicky
coil I made was only giving me9--10cm tesoro widescan coil gives me 28-32 cm
Disc works and all metal great.sorry no pics
big thanks to andy

[bernte_one]

Can anyone give me info which resistor value i should use for volume control on tgsl.
Want to place it in row with +line of audio out to headphone connector plug.

thx

with resistor value i mean which resistance should a vol potentiometer have to get a working vol control most there are used 1k potis

has anyone experience with it?