#8 post in this link https://www.geotech1.com/forums/show...hematic-wanted
Announcement
Collapse
No announcement yet.
Announcement
Collapse
No announcement yet.
bbs 1000
Collapse
X
-
-
ok but in this case, the capa is located on the exit, so yes it is a filter .. but for what reason? thank you.Originally posted by Altra View PostThe 100nf should be across pin 4 and 7 AD797, it is a bypass filter.
The 100 ohm is correct which provides short circuit protection on output of preamp.
Comment
-
Originally posted by Altra View PostThe schematic is not correct. The 100nf is not on the output. The sovereign and Excalibur have a 1uf coupling cap on the coil input to the main circuit board. The 100nf is across v+ and v- of preamp.ok thank you Altra, i will remove the 100nf capa, and put a bridge instead.
Comment
-
yes, i added the cap because i do things more universal. not just ML like in this case. anyway you can do not set the cap.Originally posted by lamoiz View Postmerci les gars
hi kt, on your preamp diagram of 2019, you added a capa of 100nf in series behind r 100, what is the use? is it for decoupled the output?[ATTACH]56232[/ATTACH]
Comment
-
-
two clicks
https://www.aliexpress.com/item/32850810364.html?spm=a2g0o.productlist.0.0.2edd8ed 4GPdDwl&algo_pvid=65361881-8b89-4cdf-b616-563b98332e0c&algo_exp_id=65361881-8b89-4cdf-b616-563b98332e0c-36&pdp_ext_f=%7B"sku_id"%3A"65240629954"%7D
Comment
-

Comment