Euromag 3D @ Aliexpress

[ivconic]

I tried again with a PM on the forum.
PM is a disaster!
Although I opened your PM and read it a couple of times; I still get a notification as if it's a new message??
And this has been happening like this for months with other members' messages.
So I became inert and uninterested to always check for new messages.
So I literally ignore those notifications for months.
Because whenever I open; I always see that there are no new messages, only old ones that I have read a long time ago.
Am I the only one having these problems?
Is there anyone else?
Or did everyone else give up fighting windmills a long time ago?

[ivconic]

Uh, I didn't see the PM!
Today is a strange day, I have too many correspondences everywhere.
All messengers are boiling here at me!
In any case; I don't mind deleting too many "emotional" posts.
Now you reminded me; something is wrong with the forum PM system!? For a long time.
Messages are difficult to open, and in order to write a reply I have to click on the name of the member and only then get the option "send pm" or something like that.
Due to the difficulties with the PM system, I almost lost the habit of checking PMs.
I really didn't even notice that I had new PM.
In the future, you and other members will know; if I don't respond to PMs, it doesn't mean that I'm too overbearing or that I'm deliberately ignoring messages... but I simply don't notice the notification and have additional problems manipulating messages.

P.S.
OK, so now the one with the less hair on his head is on duty!

[Carl-NC]

As I said in my earlier PM to you, you might want to try a different approach. Taunting and belittling other members is not allowed, and doing it to your own customers seems rather dumb.

[ivconic]

Ha, ha, ha!
I see that my good friends (at least I consider them as such) never sleep!
I just wonder who is on "duty" now!?
The one with more hair on his head or the one with less hair on his head?

[ivconic]

To start the device, do the following:
1) Install a 3.7V (4.2V full) LiPo type battery.
2) Make sure the battery is full, if not; plug in the charger to charge it.
3) When the battery is full; turn off the charger.
4) Press the "On" button for a maximum of 3 seconds. The device will start.

[ivconic]

Ok, so that the other fair members of the forum don't think I'm exclusive, I'll repeat in detail:
The type C port is only used for charging.
The 3.7V lithium-ion battery (similar to a mobile phone battery, with a protection board) is connected to the B+ and B- of the main pcb.
There is a charging circuit, a one-button power On and Off circuit, a DC-DC boost circuit, and a 5V voltage regulator circuit on the pcb.
The charger can only charge the battery, and using it to power the motherboard is unstable.

[ivconic]

@ Lidarking & Credov
To begin with, I recommend you "both" to get information here: https://www.geotech1.com/forums/foru...er-gradiometer

[Lidarking]

I have one account and I found out about your forum only after I found and bought a product on Aliexpress.

If I turn on the device through the charging port, why is there no voltage on the contacts, where I understand the battery should be connected!?

And why does the Lidarking device turn on from the charging port?

https://drive.google.com/file/d/1MPv...ew?usp=sharing

I purchased 5 complete kits, all five had missing parts, 3 off them wont start powered up even holding start button more than 5 seconds. I tried different power adaptors from 1amp to 5amp usb etc, still the same these are poor quality, I was planning to buy lots more, but so far its really put me off buying from any chinese outsource.
They are faulty units until its resolved from seller these are not great kits, no wiring diagrams to make a safe solder, if people on this forum would stop judging new members about this and help show plans, show videos of how great this unit is to build, show plans on where to wire things HELP us and stop being judgemental .

[Lidarking]

Lidarking... we can't solve the problem if you behave autistically and at the same time you are excessively loud on the forum with many strong words!
Mistakes happen, living people make mistakes. This does not mean that there is an evil intention behind every such mistake. No one here is a fraud. I wouldn't put my name on here for such a pitiful sum of money.
You barely have 3 posts on the forum and you immediately started accusing and labeling in turn!
You have to cooperate and the problem will be solved.

ivconic, Dear ivconic,

I want to take a moment to address an important issue that has been weighing heavily on me. Your recent comments regarding disabled individuals were not only disrespectful, but they also demonstrate a troubling lack of understanding and empathy.

As someone who lives with disabilities, I find your remarks deeply offensive. Discrimination in any form is unacceptable, and it is disheartening to see such behavior from a member of this community. We should strive to uplift and support one another, not tear each other down with immature and hurtful words.

Furthermore, I want to highlight that I have invested a significant amount of money—£831, to be exact—into this community. This is not a trivial amount, and the faulty and missing goods I received were not mere accidents. It’s essential to hold ourselves accountable for our actions and the impact they have on others.

I urge you to reflect on your words and the values we should embody as a community. Let's foster an environment of respect, understanding, and support for everyone, regardless of their circumstances.

Sincerely, Lidarking.

[Credov]

I have one account and I found out about your forum only after I found and bought a product on Aliexpress.

If I turn on the device through the charging port, why is there no voltage on the contacts, where I understand the battery should be connected!?

And why does the Lidarking device turn on from the charging port?

https://drive.google.com/file/d/1MPv...ew?usp=sharing

[Credov]

I decided to check my purchased magnetometer today and I see that it also does not work. Only the led lights up.
What am I doing wrong? Where do I click to make it work?
The soldering quality is terrible, the LCD connector is melted.

https://drive.google.com/file/d/12wb...ew?usp=sharing

[Lidarking]

Look, Ive spent nearly £800 including custom tax and fees, they sent faulty used goods with items advertised missing.

Please tell me how Im overacting?

[ivconic]

Hello, I finally received my order today "FGM-3 PRO fluxgate sensor. "Euromag 3D" - magnetometer/gradiometer" after very long wait, but there is loads of things missing from my order! they advertised EUROMAG 3D screen covers with raised buttons, I never got them! not happy at all fasle misinterpretation false advertising, please send right away I can't resell these with covers missing! no instructions! only 1 sd card I purchased 5 kits , Im not happy,
description very misleading, they said it was the courier.

it was a sealed box wrapped in bubble wrap, why would someone steal plastic covers and not electronics!, you just never put them in, you conned me! there is no screen covers you have lied to me, replace the covers as advertised or I will leave damaging feedback I was going to buy another 10+, but I have lost faith in that company, very bad business, they dont even reply.

Never buy stuff from AliExpress again, no instructions, plans, 3D print plans for casing etc to build it, completely conned all i got was faulty used junk.

Very strong words and too many repetitions of "con, lie..." etc.
However, I understand your dissatisfaction and we will immediately take measures to ensure that you get what you paid for.
That's why we're here on the forum.
It's not in my interest for customers to be unhappy, I hope you understand.
As for further instructions, help with the finalization of devices and the like; feel free to contact me on email: [email protected], ask what you are interested in and you will receive full support from my side.
I don't know how it happened, it's beyond my control, I live in Serbia and you got the goods from China.
The colleague I work with is a very honest, fair and conscientious man and I am 100% sure that this omission is not his fault.
However... we are here to correct any irregularities.
I myself often buy various products from Aliexpress, I have mostly positive experiences, but sometimes a similar mistake happens. So I understand your displeasure. We'll work it out.

[Lidarking]

United Kingdom

[Tanu]

Hello, I finally received my order today "FGM-3 PRO fluxgate sensor. "Euromag 3D" - magnetometer/gradiometer" after very long wait, but there is loads of things missing from my order! they advertised EUROMAG 3D screen covers with raised buttons, I never got them! not happy at all fasle misinterpretation false advertising, please send right away I can't resell these with covers missing! no instructions! only 1 sd card I purchased 5 kits , Im not happy,
description very misleading, they said it was the courier.

it was a sealed box wrapped in bubble wrap, why would someone steal plastic covers and not electronics!, you just never put them in, you conned me! there is no screen covers you have lied to me, replace the covers as advertised or I will leave damaging feedback I was going to buy another 10+, but I have lost faith in that company, very bad business, they dont even reply.

Never buy stuff from AliExpress again, no instructions, plans, 3D print plans for casing etc to build it, completely conned all i got was faulty used junk.

Where are you from?