Epe pic magnetometer

[jeep6789]

If there is a love master to guide me to make this project successful, I am willing to pay you a certain amount of hard expenses

[Qiaozhi]

Hello buddy
Can you send me the magnetometer file you mentioned in the group?

[email protected]

See post #429.

[kilybsh.m]

Hello buddy
Can you send me the magnetometer file you mentioned in the group?

[email protected]

[iotservice]

GRAZIE, ora ci provo

[Qiaozhi]

thanks for the quick reply, before sending the message, I searched with the `` search '' function but I also followed the discussion and in addition to the image file of the assembly plan I did not find program code or even schematic and instructions on sensors

Using the search function to search for "EPE Magnetometer" -> https://www.geotech1.com/forums/sear...earchid=689973
The first item in the list has 72 attachments (click on the paperclip).
Scanning down the list I see the John Becker article and several examples of hex code. Is this what you're looking for?
Also, try here -> https://www.geotech1.com/cgi-bin/pag...e=projects.dat

[iotservice]

thanks for the quick reply, before sending the message, I searched with the `` search '' function but I also followed the discussion and in addition to the image file of the assembly plan I did not find program code or even schematic and instructions on sensors

[Qiaozhi]

Hi LETO, May i have a full files copy of EPE magnetometer?
In advance, many thanks.EMAIL :[email protected]

We see numerous requests for information like this, where a new member asks for full details to be sent to their email address, and it is often the only post they ever make. This is highly unlikely to elicit a response.
You should initially try using the search feature to find the details you require.

[iotservice]

Hi LETO, May i have a full files copy of EPE magnetometer?
In advance, many thanks.EMAIL :[email protected]

[ivconic]

Delete eeprom chips first.

[Omerta 1312]

I have put them as in the circuit when I open it it gives me "2 eeproms chips" but when I send the data to the computer the graph is wrong it does not send the data correctly. It shows me the whole column and not the correct column-rows, Example see the photo below

[ivconic]

Good evening, is the connection I have in the photo correct? Why does it not show <2 eeproms chips>? Is there a mistake in the circuit?
[ATTACH]53627[/ATTACH]

No mistake. It is wire jumper. Correct.
Also R6 is 10k resistor.
Don't you have schematic?

[Omerta 1312]

Good evening, is the connection I have in the photo correct? Why does it not show <2 eeproms chips>? Is there a mistake in the circuit?

[Omerta 1312]

Good evening guys, in the earth resistivity logger the eeprom works properly in the epe magnetometer neither of the two eeproms works properly, is the connection wrong? Can anyone tell me the answer

[Omerta 1312]

Thank you, okay, I made it. Now I have another problem, he has been writing "CLEARING EEPROM" for ten minutes and below he writes numbers with "OF CHIP 1 to 7" and continues. Now what should I do?

[SimonS]

This can be:
- PIC didn't programmed or without power supply or defect PIC
- missing/wrong wires from PIC to LCD
- defect LCD