As the first Chance PI, the new second chance haves the same moderate parameters. One more DIY PI MD!
Announcement
Collapse
No announcement yet.
2nd Chance PI
Collapse
X
-
-
-
-
Original concept of ChancePI is back
Just replace CPU onto ATmega328 and use this firmware.
Comment
-
HI DAN,Originally posted by dantech View PostOriginal concept of ChancePI is back
Just replace CPU onto ATmega328 and use this firmware.
https://chomikuj.pl/dantech/2nd+Chan...ip(archive)
I MADE THIS PROJECT VERY EASILY FROM YOUR DOCUMENTS.
AND SO THANKS FOR YOUR FAVORE.
BUT
PLEASE GIVE ME SOME USEFULL INFORMATION ABOUT MENU ITEMS SETTINGS.
I AM NEED THAT.
VERY THANKSAttached Files
Comment
-
A friendly word of advice:Originally posted by syavash View Post
HI DAN,
I MADE THIS PROJECT VERY EASILY FROM YOUR DOCUMENTS.
AND SO THANKS FOR YOUR FAVORE.
BUT
PLEASE GIVE ME SOME USEFULL INFORMATION ABOUT MENU ITEMS SETTINGS.
I AM NEED THAT.
VERY THANKS
When posting in a forum it is not good practice to post using only CAPITAL LETTERS.
This is the equivalent of shouting, and is not good forum etiquette.
Comment
-
-
Hello Dantech,
I am a new member here and I cannot send private messages yet, so I am asking here.
I am building the Chance PI with your 2nd Chance firmware and I want to make sure I use the complete and latest package. Could you please share (or point me to) the complete files: the latest schematic with all amendments, the PCB layout/Gerber files, the parts list (BOM), the latest ATmega328 firmware (HEX), and any build manual or notes.
Thank you very much for your work on this project.
Best regards,
Saeed
Comment
Comment