HV temporal sampling ?

[Riss]

https://www.youtube.com/watch?v=JlKkECM6sWE - !?? I can't believe these two top models are so noisy in real search. This woman probably doesn't know how to adjust the ground balance properly. They "hear" all the hot rocks!?? In Europe, such behavior of detectors is when they are tuned to the ground (a general background that has weak fluctuations) and hot rocks are heard against this background.

[moodz]

Hi Paul,

I've done a few experiments and there really is a distinct difference between ferro targets and conductive targets.
I determined what was the optimal ratio of the two pulses and the corresponding delays of the samples (as far as I could, of course), but...

But there is no goal, again a beam.

Samples from ferro targets are very close to the results of low-conductive targets (this could be assumed because in collapse time they are have a similar nature).
Later, maybe next month, when I really have enough free time, I will change a little of the detector code to look for a combination between these samples and samples after the long pulse (I think four additional samples will suffice).
If I manage to achieve some satisfactory results, I will post them on the forum.

Hey Paul, thank you for the help you provide and for the extremely useful things you share in the forum.
Thank you again.

Regards,
Vangel

Thanks Vangel ... also see my transmit circuit in the FPGA thread.
I use a version of that to produce the magnetic permeability ( FERRITE ) channel and the conductance channel ( R ) and there is a third channel ... the phase channel. ( LEAD/LAG ).

[boilcoil]

OK, thanks,
of course, I will read it very carefully.