Announcement

Collapse
No announcement yet.

Announcement

Collapse
No announcement yet.

Little help :D

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • eessoo
    replied
    i will make another one with better solder

    Leave a comment:


  • jap
    replied
    Hi eessoo
    -first re solder with a random suspect.
    -Compared to the work of all the components and their values ??and installed in its place, especially in the area u2,u6.
    -Measure -5v ,+5v.
    - solder,, this is good with very high quality.
    you will
    best time
    j.

    Leave a comment:


  • eessoo
    replied
    any idea what could be wrong with the circuit ?
    could the problem be with my soldering work?
    is this a good solder?
    http://ram-e-shop.com/oscmax/catalog...oducts_id=1799

    Leave a comment:


  • jap
    replied
    keeps beeebing is not normal.
    j.

    Leave a comment:


  • eessoo
    replied
    when i remove the coil it keeps beeebing is that normal?

    Leave a comment:


  • jap
    replied
    Hi eessoo
    0.6 bad . 0,-0.3mm ~0.4mm are good.
    best time
    j.

    Leave a comment:


  • eessoo
    replied
    i used 0.6mm wire in a 26cm circle 26 turn
    if i remove the coil it keeps BEEEBING

    Leave a comment:


  • jap
    replied
    Hi eessoo
    Test conditions in the home using a small diameter coil and should be lifted to the highest reasonable distance ensure that any affected metal surroundings as well as electricity wires - then start the test - -What are the specifications of the coil?
    best time
    j.

    Leave a comment:


  • eessoo
    replied
    http://www.youtube.com/watch?v=XKLbcQnOr18&feature=plcp
    no matter what i do it keeps beeeebing

    Leave a comment:


  • eessoo
    replied
    jap i tested it and it gives continuous beeb
    when i change the threshold the sound fades ( dose threshold control the volume f the speakers?)
    can i use 220k instead of 100k in threshold or delay?

    Leave a comment:


  • eessoo
    replied
    all good?!
    Attached Files

    Leave a comment:


  • eessoo
    replied
    what is wrong?!
    wrong capacitor? the meter says 1nf
    i bought the 220p capacitor (221 is written on it)

    Leave a comment:


  • jap
    replied
    Hi Qiaozhi
    Thanks,,,,, I know he does not ------ Note:Link to the relationship what has been written (102)and reading device (1.022)nf..So I asked him!!!!!
    best time
    j.

    Leave a comment:


  • Qiaozhi
    replied
    Originally posted by jap View Post
    what 102 ?
    best time
    j.
    102 is the code for a 1nF capacitor.

    This is very basic stuff.
    To decode the number 102, use the 3rd number as a multiplier. i.e. 10 + 2 zeros = 1000. This value is in pF, giving us 1000pF, or in other words ... 1nF.

    In case you don't know the capacitor codes, then try using this ->
    http://www.electronics2000.co.uk/cal...calculator.php

    Leave a comment:


  • jap
    replied
    what 102 ?
    best time
    j.

    Leave a comment:

Working...
X