Little help :D

[eessoo]

just to make sure
how much is P4 (volume)?
sp1?any speaker? specific speaker?

[jap]

YES my Surf- PI. in reply #18.
best time
j.

[eessoo]

u used the values in the image?

[jap]

Similar holes you can use any of them.
-AS IMAGE Use the values written IN, it updated a previous.
J.

[eessoo]

what are these holes under the resistance?!
what is the value of R6?
the list says 220ohm
R28 240K? 210k? (above MC14063)

[jap]

my

Hi eessoo
my Surf- PI.
best time
j.

[eessoo]

Hi eessoo
CD4066=MC14066BCP
CD4093=MC14093B
TLC555=NE555D
best time
j.

thank you

[jap]

Hi eessoo
CD4066=MC14066BCP
CD4093=MC14093B
TLC555=NE555D
best time
j.

[eessoo]

where are the ( CD4066,TLC555 )?
are u sure they are the same components?

[jap]

Hi eessoo
There is enough information about Whites Surf PI schematic**** you must**** read before you start.
-use any GerbView program.
best time
j.

[eessoo]

the Folder surf_pi_gerber_out.zip
the files inside are .file how do u open them?
i tried cam350 but it doesn't work

[eessoo]

Hi eessoo
**** you must**** read all bages before you start.
Whites Surf PI schematic
http://174.132.129.189/~moreland/for...=13810&page=11
by oxygen007m
best time
j.

thanks

[jap]

Hi eessoo
**** you must**** read all bages before you start.
Whites Surf PI schematic
http://174.132.129.189/~moreland/for...=13810&page=11
by oxygen007m
best time
j.

[eessoo]

Hi eessoo
There is enough information about each**** you must**** read before you start.
An good choice FOR 1-Surf PI.
I advise you to do pcb in page 11 it is working from the first experiment.
The same Parts list except for the Q2: TIP32C =IRF9640
best time
j.

where is this page 11?!
can u post the link?

[jap]

Re

Hi eessoo
There is enough information about each**** you must**** read before you start.
An good choice FOR 1-Surf PI.
I advise you to do pcb in page 11 it is working from the first experiment.
The same Parts list except for the Q2: TIP32C =IRF9640
best time
j.