Golden Mask Schematic

[iavor]

[IMG]jpg[/IMG]

[SGS]

lol wouldnt be any good over here then

Sure: http://www.youtube.com/watch?v=yiTUIjpRG-E

[bernte_one]

Yes! Bandito II (GM2), GM1, GM3, GM4 ... from Bulgaria are simple 2ch. Magnum (Rx,Disk,Supply..) and Fisher 1235 (audio output). Have nothing difficult to make from everyone.

maybe you are right
but with a layout file and a good shematic it would be easier for the non electro scientists here i am hot for try it but im not able to produce 2ch magnum plus fisher audio layout for a pcb


regards

[satdaveuk]

Golden Mask is good only for clean places. In places with old ceramic, dies and finds nothing. See for yourself: http://www.youtube.com/watch?v=rr4MQSTDEqM

lol wouldnt be any good over here then

[SGS]

Golden Mask is good only for clean places. In places with old ceramic, dies and finds nothing. See for yourself: http://www.youtube.com/watch?v=rr4MQSTDEqM

[N@SKO]

Is any body have a pics of Golden mask 4 PCB with good resolution?

[kriks]

.

the first detector that is sold by Vladimir Lilova the bandido, or tgsl ,golden mask was the initial version of the magnum with two channels ,2 golden mask and golden mask and golden mask 3+ ,the same machine the difference between golden and golden 2 3 is a table golden3 VCO and two-tone discriminationa golden mask 3 + is crafted with special oscillator with two MOSFETs, and in 7555 used the generator which gives two to three times the force tx osciltoru, but Golden Mask 3 .

Yes! Bandito II (GM2), GM1, GM3, GM4 ... from Bulgaria are simple 2ch. Magnum (Rx,Disk,Supply..) and Fisher 1235 (audio output). Have nothing difficult to make from everyone.

[bernte_one]

hello

is anyone able do to make a layout file from that board with conventionel parts (not smd)

i search some projects for 2012

regards bernd

[1966]

What GM is this?Is it a GM4?Couse 3+ dont have bourns preci pots on pcb.
Btw asap will take a pic of the power box/ small board.

Can some one point me out if theres a chance that this can be a two toner with minor ajustment,say like IGSL from diode to free pins from ic.If so please explaine.My ics are sanded also and my guess is all pcb is the same for gm1/4

Tnx in advance

Regarts
Tepro

GM4

[Tepro]

What GM is this?Is it a GM4?Couse 3+ dont have bourns preci pots on pcb.
Btw asap will take a pic of the power box/ small board.

Can some one point me out if theres a chance that this can be a two toner with minor ajustment,say like IGSL from diode to free pins from ic.If so please explaine.My ics are sanded also and my guess is all pcb is the same for gm1/4

Tnx in advance

Regarts
Tepro

[1966]

Привет на все

[N@SKO]

Hi Tepro!
Is it possible to make some pictures of the board
for POWER BOX. I am very grateful to you!!

[Tepro]

To Ivconic,

Hello Ivconic have a smal Q for you perhaps you can help?
I got the GM3+ and almost got the IGSL working( waiting on friend with scope)
I like to know if i can do the same trick for 2 tone with IGSL with GM?
looks to me that the ic have the pinout for it and finding free pins isnt that hard.
Am i right or totaly wrong?

Like to hear a 2 tone to determen good or bad metal.

Hope you can help

Thanks in advance Tepro

[satdaveuk]

http://www.geotech1.com/forums/showthread.php?t=17215
Bandito 2 schematic = Golde mask 2 but whith little change

I dont know whos if any the gold mask is based off but what I do know is there was tweeks done on them for the UK market and ive not read a bad write up, Garry describes the gold mask range similar to the tesro silver saber but with alot more punch, he was pulling out bits of hamered silver 7" plus getting constant 2 way signals, Garry does not like detectors with lots of knobs and meters ie DFX, thats why I dont trust his judgement on them, but far as basic get up and go detectors he seems to be accurate with his judgement, like the 1V which in my and his opinion are the same.

[N@SKO]

http://www.geotech1.com/forums/showthread.php?t=17215

Bandito 2 schematic = Golde mask 2 but whith little change