PIM-2 Digital Metal Detector Project

[Firebox]

Hi, I found this Video from the PIM-2 on youtube:

http://www.youtube.com/watch?v=tF4p1w71UXY&feature=plcp

can the PIM-2 fading out iron or does he have a iron Mask ?? it seems to be a prototype .... maybe the version V07 ??

By the way, what does the PCB kit costs? and is the software limiting (500 changes) now repealed in V06?

regards

[g.s]

hello albombaci to my country there is processor ( ATMEGA8A_PU ) will work correctly.
also there is diodos ( BYV28-200) but the ( BYV 28-150) there is a problem if you use this.
If anyone can help me. thank sixthly advance g.s

[sakis1]

hello albombaci to my country there is processor ( ATMEGA8A_PU ) will work correctly.
also there is diodos ( BYV28-200) but the ( BYV 28-150) there is a problem if you use this.
If anyone can help me. thank sixthly advance g.s

hi from me gs,I made pim 2 and the resistance R 16 and diodes D 12 do not put them on the board thus works very well , Put a short circuit in this place.regards

[g.s]

in pleasant sakis1 starts to illuminate the board to help and i to this project

[sakis1]

remove the R 5 and put a pot on the coil connector 500 kΩm and find that work best, measure the pot and put a resistor in the price of pot.(The coil is not more resistance from 1,2 oms <utp cat5> )

Greetings

[g.s]

hello sakis1 what the programer WRITING atmega8 . if you pcb ,schematic, what these programs.
would greatly facilitate.

[jap]

Hi g.s
see link:

http://electronics-diy.com/avr_programmer.php

best time
j.

[g.s]

ok jap I looked good and simple,But I fail because the elbombaci t wo vortex CODES (eeprom...code) How do you write a two processor codes

[jap]

Hi g.s
-u write ...code alone, after that write eeprom.( one after one)--from
-I put all u need in rar.
best time
j.

[6666]

Hi Jap
thanks for that zip file
6666

[DJJR]

hi all I'm also building this unit can you put the latest version of the diagram and software

[6666]

Here Djjr

http://www.lugatek.com/forum/index.php?topic=150.0

[DJJR]

6666
is there any differents from the schemiatic v2 other then a few resistors that was stated in this thread

[g.s]

Thanks jap but the file zip sent echi Code,you can not open

[jap]

Hi g.s
u read it now.
best time
j.