My Digital Pulse detector Delta Pulse 3

[volcano]

no
that is true
all electrolytic capacitor are 25v

So we can not mix the two (25v and 16v) voltage value.
We must use one of the two values.

[hadi-dindar]

Hi
I think it does not matter the value of voltage

no
that is true
all electrolytic capacitor are 25v

[volcano]

all of electrolit capacitor are 16v or 25v

Hi
I think it does not matter the value of voltage

[jap]

Hi erdin
To the second step with success.
best time
j

[hadi-dindar]

all of electrolit capacitor are 16v or 25v

[mrmr16]

Hi to all

What volt of capacitors from c1 Until c39

Regard

[hadi-dindar]

ok bro
after compeating dp3 put picture of circuit and set. i want to buy pic from pasha( hossain damir ) to complate this set.

[erdin]

Pasha is a good man to do business with, I received by DP3 today. I cant wait to put it together!

[volcano]

Hi Pasha
I,ve suggestion Why not put full hex file specified number of on/off as 200 times like BIM2 in order to be fully take advantage and at the same time your rights found.
---I hope that you take with all due respect---
best time
j.

It is a good idea JAP

[jap]

Hi Pasha
I,ve suggestion Why not put full hex file specified number of on/off as 200 times like BIM2 in order to be fully take advantage and at the same time your rights found.
---I hope that you take with all due respect---
best time
j.

[jap]

Hi Miata
-U true For the point 11. Adjust(not--connect--) 6,2V (with Trim 1) at Pin 5 of D6
the image above is true.
best time
j.

[Miata]

Hello erdin,

sorry, I don't speak turkish. Your translation is correct but makes no sense. It is better, Pasha reads the document.

Regards
Jürgen

[erdin]

ok

this is the the file
http://www.mediafire.com/?vl56omtv6x5dmbe

Volcano, There are certain bits that I put notes in that I said I was not sure If I translated correctly, we should wait untile someone fully reads through it just to make sure every thing is translated correctly!

Hi volcano,

thank you for translation.

There is a little error at point 11.

11. Adjust 6,2V (with Trim 1) at Pin 5 of D6

Regards
Jürgen

Jurgen, I think your turkish may be better then main, can you read through it and highlight the bits that i may have translated wrong to prevent people from making mistakes.

Regards
erdin

[Miata]

Hi volcano,

thank you for translation.

There is a little error at point 11.

11. Adjust 6,2V (with Trim 1) at Pin 5 of D6

Regards
Jürgen

[volcano]

thanks to all for responses and encouragement