Announcement

Collapse
No announcement yet.

Magnum on steroids!

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • pustareka
    replied
    sxema ok work -not work



    bad very bad 4053 bad choise IC. not good 2500 kom resistance work bad- need 175 om at 15v


    best BUY adg444 15v 70 om resistance work super good.
    Attached Files

    Leave a comment:


  • pustareka
    replied
    Originally posted by vlambers View Post
    I devices operate on 3 frequency: 8 (5) -12 (10) -18kGts.










    Sent pcb serbia?
    prise is 1 pcb ?
    prise is all kit componant plus pcb ?

    Leave a comment:


  • pustareka
    replied
    Originally posted by MARKORAM94 View Post
    you have here corect pcb and sch my problem was fixed, my friend orbit found litle problem and fix them
    he testing them and work like golden mask
    Thanks Orbit
    Thank youMARKORAM94

    Leave a comment:


  • MARKORAM94
    replied
    Originally posted by pustareka View Post
    link ?

    schema correct, pcb correct, no smt only tmt. post all here rusian forum. thanks. lobofoma best gold seeds nugets roma sexterous. anderwater also best.
    you have here corect pcb and sch my problem was fixed, my friend orbit found litle problem and fix them
    he testing them and work like golden mask
    Thanks Orbit

    Leave a comment:


  • Koala
    replied
    Vlaser wrote over on MD4U.RU

    "It's time to try out the mask 4. Was pleasantly surprised when using the device began picking out a coin for a coin on the trash. The DD coil is slightly larger than the open palm
    .
    Deus, Fisher 75 and safaris are blinded in this place. Worked black-colored as a machine gun. Very sensitive to detail, does not miss. Very satisfied with the device.
    _________________
    _________________
    Tesoro Cibola.
    TGSL.
    Tesoro lobo mod.
    Kid FM
    Verator.
    Clone AVR.
    Chance.
    Fisher 1266-х.
    Tesoro ELDORADO
    Terminator 3.
    Minelab Musketer.
    White's IDX PRO
    Quasar.Frost 6 (Super).
    Golden Mask 4 (exceeded all expectations)
    Verator 5-4."


    Looking at his signature vlaser has built more than a dozen machines and likes this a lot

    Unfortunately I can't find which board version that he made

    Leave a comment:


  • Orbit
    replied
    Sincerely nothing special !

    Leave a comment:


  • pustareka
    replied
    best steel wire coil rx.tx. phase-tx. steel wire max.magnetica field. best deep. check wire compas. effect see noddle. big deppt steel wire windings. check self, big troth compass.

    Leave a comment:


  • pustareka
    replied
    link ?

    schema correct, pcb correct, no smt only tmt. post all here rusian forum. thanks. lobofoma best gold seeds nugets roma sexterous. anderwater also best.

    Leave a comment:


  • Koala
    replied
    Been looking on the md4u.ru site.

    Seems some are having a lot of success using this with a small coil in amongst the iron and picking out tiny gold and silver.

    Leave a comment:


  • MARKORAM94
    replied
    Originally posted by crni1 View Post
    My PCB still stands because I do not have the correct scheme.
    [АТТАЦХ] 40814 [/ АТТАЦХ]
    [АТТАЦХ] 40815 [/ АТТАЦХ]
    i think this is corect schematic
    but i cant garanted because my pcb doesnt work i was chek pcb with this schematic and everything is corect done with schematic
    but i think something misig thereClick image for larger version

Name:	mag_redu.JPG
Views:	3
Size:	495.8 KB
ID:	349490

    Leave a comment:


  • crni1
    replied
    My PCB still stands because I do not have the correct scheme.
    [АТТАЦХ] 40814 [/ АТТАЦХ]
    [АТТАЦХ] 40815 [/ АТТАЦХ]
    Attached Files

    Leave a comment:


  • MARKORAM94
    replied
    Originally posted by crni1 View Post
    Markoram on my pcb is connected, I'm not done yet so I can not tell you what and how it works.
    something mising i try a lot variant to fix but something was wrong

    Leave a comment:


  • crni1
    replied
    Markoram on my pcb is connected, I'm not done yet so I can not tell you what and how it works.

    Leave a comment:


  • MARKORAM94
    replied
    i fix detection for ferrous and no ferrous metal. I will show on picture now, but i dont have diskrimination coil is conected very well but i think something is wrong with this pcb or some conection is wrong Click image for larger version

Name:	Untitled.png
Views:	1
Size:	524.0 KB
ID:	349485

    Leave a comment:


  • Orbit
    replied
    Is this scheme correct?
    And whether someone has done this pcb ? Is there any mistake?
    Click image for larger version

Name:	golden mask 4.JPG
Views:	1
Size:	401.5 KB
ID:	349484

    Leave a comment:

Working...
X