SNIFFER XR-71

[amtech2005]

SNIFFER XR-71

Geo , KT315 . Do not forget my post #160 of this thread !!! That picture of the XR-6 is the "Missing Link" [The German address and postal code are printed on the case , and the letter's "gmbh" ??? ]. The Sniffer XR-6 was the first in a series of detectors , then XR-7 , then XR-71 which was a modified upgrade. And then after the "German Company went out of business-ALL OF A SUDDEN !!!!AND MIKRON TECHNOLOGY APPEARED All of a Sudden !!!!!...And then Delta PulseAll of a sudden !!!!..I do not know what role Eric Foster played in this but I believe Electronics Design Engineer Eric Foster lives in England , not Germany . Rolf Wilhelm And the copy of XR6"DBP2010" lived in Germany !!! We need to find the Clear photo of the Xr-6 , and it is buried in eastern European forum from around 2004 to year 2005 !!!! All I want is the correct History , and addresses , and more photos , more Schematics . I do not ask for Much !!!!! .I wish someone on this forum or a guest would post photo's and all the information we need to finish this topic , so we can rest and study the lost XR-6 Schematics .We only have about 20 unsolved/unknown metal detector mysteries on this Forum , so one more will not hurt us..........Take care Everyone...........Eugene

[Geo]

sorry, but he did nothing. read link.

http://www.findmall.com/read.php?34,130286,130287#msg-130287

do you agree that he gives only some anatomy on the schematic?

I don't agree.
Eric gave to me and to BBsailor a detector that is exactly the same with the XR71p. He made these detectors before years for a wood company.
This is the reason that i say that Eric made first the Xr71. Maybe i make mistake..... but this is the reason that we write here!! to find the true
Regards

[kt315]

And Eric what made?????

sorry, but he did nothing. read link.

http://www.findmall.com/read.php?34,130286,130287#msg-130287

do you agree that he gives only some anatomy on the schematic?

[amtech2005]

SNIFFER XR-71

Geo , I know you were Serious . I am the one who made a joke about Eric , not you !!!! Anyway , A long time ago I saw a clear photo of the XR6 Case , but did not care about all the writing and addresses . Now I now how very important it is to write down information on paper.The XR6 might become an "Unsolved Mystery"..............Eugene

[Geo]

Who Cloned ERIC ???? .Speaking of Clone !!!!! Today is the 50 year anniversary Of Nasa !!! "Space Flight and Exploration" !!!! I wish I can have a Clone Of 1st officer "TPOL" from Enterprise sci-fi TV SHOW !!!!!......See zip-file...........A little off-topic , but still very educational , "Nasa and Space-Travel Related"........Eugene

I mean a PI detector that is exactly the same with XR71p (same pcb) and it is constructed by Eric Foster

[amtech2005]

SNIFFER XR-71

And Eric what made?????

XR7 is clone of DPD2010
XR71p is clone of Delta pulse
Bandido PI is clone of Delta Pulse
Delta Pulse is clone of Eric!!!!
So i think that Eric is the First!!!
Regards

Who Cloned ERIC ???? .Speaking of Clone !!!!! Today is the 50 year anniversary Of Nasa !!! "Space Flight and Exploration" !!!! I wish I can have a Clone Of 1st officer "TPOL" from Enterprise sci-fi TV SHOW !!!!!......See zip-file...........A little off-topic , but still very educational , "Nasa and Space-Travel Related"........Eugene

[Fred]

Hello Again KT315 , I found this Schematic from another Forum and from a 2005 archive Posting !!! Was this the XR-7 Original ?? After XR6 of course........Thanks.....Eugene

This is very diferent from DBP2010, so it is not likely to be the XR-7.
I am looking for the XR7 to carefully compare with DBP2010, but no success so far...

[Geo]

here 'soldered' means a jumper (the switch was absent). then clearly 'Aban' made 'Delta Pulse', GG made 'XR-71'.

And Eric what made?????

XR7 is clone of DPD2010
XR71p is clone of Delta pulse
Bandido PI is clone of Delta Pulse
Delta Pulse is clone of Eric!!!!
So i think that Eric is the First!!!
Regards

[kt315]

Hello Again KT315 , I found this Schematic from another Forum and from a 2005 archive Posting !!! Was this the XR-7 Original ?? After XR6 of course........Thanks.....Eugene

hi Eugene. yours is due 'XR-71' (this schematic was been re-made by Vladimir to more clear view, later). look attached schematic. XR-71 is absoliutely copy of Delta Pulse on 99,9%. one difference is only this switch MANUAL-AUTO (plus a pot), what mentioned in GG's e-mail:

As you good know on pcb are switch for "Manual" - "Auto" tune which was soldered in "Auto" mode in "Aban" pcb.

here 'soldered' means a jumper (the switch was absent). then clearly 'Aban' made 'Delta Pulse', GG made 'XR-71'.

[Max]

God sees I do not want to open private mails. but you want to know The Truth. so be ready get it!

>from: Gueorgui Gueorguiev <gmg###> ( добавить в адреса)
>to: kt315####
>subject: XR71
>
>
>Hello KT315,
>I/m can send you a pcb which is tuned and work well. Do you interest of it?
>Gueorgui Gueorguiev
>gmg###
>
>thanks for reply.
>please send me much more photos of PCB, tuned PCB, PCB in box.
>also your prices.
>
>Jurij sells PCB of GROZA-III for E20. 60 for tuned PCB, 70 mounted in box.
>
>YOURS
>We haven't to speek for price. I'll send pcb not for money but for somthing similar. Last year I sent to Jurij some coil
shells - you can ask him. My XR71 pcb is the same as "Aban" sent in Carl forum. He ("Aban" is pseudonim which one bulgarian
boy have used. He is from Burgas and is very good liar.) He had stolen my pcb at the early 2000. This pcb have manifactured
yet have a bit modification - we added a part with batery changer and lowbat indication. As you good know on pcb are swich
for "Manual" - "Auto" tune which was soldered in "Auto" mode in "Aban" pcb. The main advantage my pcb is spetial selection
for IC and pasive - You mast know this is "secret", because there were many XR71 detectors were manifactured but when you
will test any from "VE EL electronics" you could register adventage. I have many detectors and think it was one of the best
models at the time and can compare it.
About XR71 I can say that it "Father" XR7 (I had manifactured 3 devices before XR71) was one very fine designed Pi machine.
If you are interesting I can send you shematics of XR7.
Best regards,
Gueorgui Gueorguiev
The best lie I recived from "Aban" was for Gold Fish 2 - a Pi machine which was manifactured from my friend Wesselin
Trendafiloff - "Aban" wrote me that he was bougt it from Dubay! My friend was very happy that it detector was gone to OAE!
GG

Hi,
I think we have same idea of GG role in XR71, just you expressed bad... talking about he's designer of XR71, I think he isn't. He designed a PCB for it starting from original schematic.

From the email I understand he made PCB design and XR7 and XR71 assembled machines... then he blamed Aban and talk about his friend...

So he actually don't say "I'm designer of XR71" but just talk about designing the PCBs... selecting components, tuning etc

Sure, he probably made good work as small scale manifacturer of XR71 and XR7 clones but this don't mean design/scematic of XR71 or XR7 is from him.

It's like, if I clone GS4, would I call myself designer of GS4...? I wouldn't. And he didn't.

Now it's clear.

Kind regards,
Max

[aft_72005]

I/m can send you a pcb which is tuned and work well. Do you interest of it?

We haven't to speek for price. I'll send pcb not for money but for somthing similar.

If you are interesting I can send you shematics of XR7.

Hi KT 315
Also, I communicate with Gueorgui Gueorguiev.
He didn’t give me any technical data about xr-7and xr-71.
He is not scientific seem as another guys in this forum.
He didn’t like communicate technical data.
Also I communicate with Aban , he had large archive
Of circuit. Also seem he is very busy now,
Because I didn’t reply from him.
Best regards.

[aft_72005]

Hi amtech 2005
I saw it, it is very similar to xr 71 .
Are you sure it is xr7?If ,yes what differences
Between xr7 and xr71?
Best regards.

[amtech2005]

SNIFFER XR-71

Hello Again KT315 , I found this Schematic from another Forum and from a 2005 archive Posting !!! Was this the XR-7 Original ?? After XR6 of course........Thanks.....Eugene

[kt315]

God sees I do not want to open private mails. but you want to know The Truth. so be ready get it!

>from: Gueorgui Gueorguiev <gmg###> ( добавить в адреса)
>to: kt315####
>subject: XR71
>
>
>Hello KT315,
>I/m can send you a pcb which is tuned and work well. Do you interest of it?
>Gueorgui Gueorguiev
>gmg###
>
>thanks for reply.
>please send me much more photos of PCB, tuned PCB, PCB in box.
>also your prices.
>
>Jurij sells PCB of GROZA-III for E20. 60 for tuned PCB, 70 mounted in box.
>
>YOURS
>We haven't to speek for price. I'll send pcb not for money but for somthing similar. Last year I sent to Jurij some coil
shells - you can ask him. My XR71 pcb is the same as "Aban" sent in Carl forum. He ("Aban" is pseudonim which one bulgarian
boy have used. He is from Burgas and is very good liar.) He had stolen my pcb at the early 2000. This pcb have manifactured
yet have a bit modification - we added a part with batery changer and lowbat indication. As you good know on pcb are swich
for "Manual" - "Auto" tune which was soldered in "Auto" mode in "Aban" pcb. The main advantage my pcb is spetial selection
for IC and pasive - You mast know this is "secret", because there were many XR71 detectors were manifactured but when you
will test any from "VE EL electronics" you could register adventage. I have many detectors and think it was one of the best
models at the time and can compare it.
About XR71 I can say that it "Father" XR7 (I had manifactured 3 devices before XR71) was one very fine designed Pi machine.
If you are interesting I can send you shematics of XR7.
Best regards,
Gueorgui Gueorguiev
The best lie I recived from "Aban" was for Gold Fish 2 - a Pi machine which was manifactured from my friend Wesselin
Trendafiloff - "Aban" wrote me that he was bougt it from Dubay! My friend was very happy that it detector was gone to OAE!
GG

[amtech2005]

SNIFFER XR-71

After days of searching I finally found the image of the sniffer XR6 that was posted by forum member "Aykurtelektronik". There were more photos posted of this "Original" P.I. Machine that started it all !!!!! I believe when we see the photos again it will show the German city and the postal code. I believe the XR6 detector was first , then the XR71 was second , and the third was the "Delta Pulse" . I am now searching for more photo's . And finally I do believe that the "DBP-2010 P.I." was copied from this XR6 metal Detector........Bye.........Eugene