TESORO GOLDEN SABRE

[Mr.Jaick]

W. Lahr NEVER made mistake on this, period.
Each diy that i made according to his retraced schematic; works alright from the first switching On.
W.Lahr is rock solid!
Why is this difference?
Due different voltage supplying the oscillator, simple as that.

hi again Mr.Ivconic you're right the original schematic is fine i returned the circuit back to default and it fortunately worked, well many thanks to you guys
but i don't know why it did't work on bread board , i checked the connections many times, very strange

[SVEN1]

Those machined pin dil sockets gave me many problems in the past. Haven't used them in years. I switched to these I don't have problems with them.

[ivconic]

But i think i discovered the main problem at his nice work already.
It is the greasy welding pasta.
Worst calamity you can imagine in our line of works.
I can not resist not to laugh, when see "pro" dil sockets there!!!
I wonder even if nitro will solve the problem there!

[ivconic]

It is an LC circuit. The LC stores energy and then 'kicks back' this energy into the caps.

Check on how the Spark coil ignition system works in your car. With an inductor and capacitor the ignition system converts 12V into 100's of Voltages to create a spark across the plug's gap.

5000 volts on my Opel.
Don't ask me how i know this.
My curly hair shows it all.

[waltr]

yeah that is a standard type colpitts oscillator
now i'm going to change things to default and see if there'd be any differences (hopefully) i'll come back with results
but i have a question : how a transistor colpitts oscillator would oscillate at 16Vpp by using +8V supply??
that's pretty strange to me...

It is an LC circuit. The LC stores energy and then 'kicks back' this energy into the caps.

Check on how the Spark coil ignition system works in your car. With an inductor and capacitor the ignition system converts 12V into 100's of Voltages to create a spark across the plug's gap.

[ivconic]

If i am not mistaken in what i see, if that is not just your spouse's make up set left there randomly; than your pcb is greased very well, all over the place and conducts randomly everywhere.
Only cure now is nitro resin bath. For stay and soak for 20 minutes deep in nitro resin. Later on brushed up good and let to dry good and long on fresh air.
And all over the sudden; that pcb will start working just fine!
(Assuming that those strange modifications at TX stage are making any sense)

[ivconic]

Could it be... by really unfortunate occasion... the oily conductive grease for welding gutters and various metal sheets!???
Or it is just put there for fun?

[ivconic]

WAIT A MINUTE!
WTF is this on photo?

[ivconic]

OK guys, calm down.

Also, I think you're all being unduly harsh towards Mr.Jaick. Personally, I think he's done a pretty good job of creating his own PCB.

Agree with you my dear Quasishoshy!
Very nice pcb put together.
Very neat work.
But when i saw that piece of schematic he posted... well!

[Qiaozhi]

OK guys, calm down.

Also, I think you're all being unduly harsh towards Mr.Jaick. Personally, I think he's done a pretty good job of creating his own PCB.

[ivconic]

Unlike your pathetic attempts to sell your pcbs on each topic here
---
because i do perfecto boards, yes. i have just last 4 pcs of Delta Pulse. thats all. or 'Ivconic Magnetometer/Gradiometer' is free project?

Not free. Also not spread on all topics on the forum.
I am not annoying everywhere with it.
Nor i spit on your GMK attempt.
I never said neither one bad word about it, anywhere.
On contrary; i was thinking to order one pcb from you and try to make it.
...
Ok, time to quit this pointless thing.
Let it be your way KT315.
Do have long and happy life.
I really wish you that.
Cheers!

[kt315]

Unlike your pathetic attempts to sell your pcbs on each topic here
---
because i do perfecto boards, yes. i have just last 4 pcs of Delta Pulse. thats all. or 'Ivconic Magnetometer/Gradiometer' is free project?

[ivconic]

And it will never start to work alright... as long as people reading your nonsense and intentionally misleading remarks.
Unlike your pathetic attempts to sell your pcbs on each topic here; i am not selling nothing relating to Tesoro diys.
So it works alright to me.
Don Bowers, Eduardo, Nandor... who else? Probably 100 people more; works for them quite alright.
It is quite alright and common to novices and new members to have certain problems in first attempts to make the detector.
Any other too, not only TGSL.
That's why we are here, to help them in process of making it.
That's how we built this giant topic with over a million of views!
So it works for everybody at the end; it is not working only for you?!
In the past i thought that you are just harmless fool.
Now i see that you are really malicious and pretty sick person with need for urgent hospitalization.
But if administrators don't give a damn and let you do whatever you want here; there is nothing i can do about that.

[kt315]

10 108 posts on Geotech forum
---
227 pages of the thread and in every new post is a problem told. simplest schematic and is not working.

[ivconic]

10 108 posts on Geotech forum... and still so low knowledge and understanding of some basics in Electronics?
Hate to say; ignorance.
"...It is logical 4k7 and not 47k..."
Electronics is not based on whats "logical" and "not logical" but on strict laws and rules.
If you take the same oscillator and supply it with 5v,8v or 12v; it is not the same.
You must know that? Or not?
...
"Toxic" is when you refer to me with "iwkonik" or any other idiotic combination of letters.
I am member of this forum since 2006.
My nickname is so easy to remember. It has only 7 simple letters. "ivconic".
Only the totally brainless cretin can not remember this.
So...
You are polluting this forum, almost all the threads and topics on it, constantly with tons of rubbish and nonsense.
10 000 from your 10 108 posts are nothing but plain rubbish and garbage.
I don't know why administrators are tolerating this any more?
You are harmful person, with all your nonsense that you posted so far.
You are purposely misleading many new members that are coming here for the first time, to learn something.
With your constantly idiotic behavior you are making lot of damage to Geotech forum.
I really do not understand why administrators do allowing this?