TESORO GOLDEN SABRE

[mayky]

BF245C ?

[FatBob]

Well from this; https://www.fairchildsemi.com/datasheets/J1/J105.pdf the big difference is Gate-Source Cut-Off Voltage.
J106 might work if your voltage is in range;

J106 -2.0V to -6.0V
J107 -0.5V to -4.5V

[Nandor]

Hello to all, can somebody tell me if I can repleace the J107 transistor with other J's like J105 or J106? On TME.eu there is no J107 only 106-105.

[kt315]

yea. you can take TX part from Troy shadow x5 kinda like as 'universal TX generator' and use any VLF coil.

[bernte_one]

you can use ts800 or ts1000 coil for muski (rx1mH / tx10mH)

but you have to assemble an additionel pickup pcb on your tgsl pcb (the minelab coil Oszillator)

[kt315]

TGSL will work with a coil without a capacitor inside on TX winding. ie tesoro uses SIMPLEST construction of a coil - NO RESISTANCES
NO CAPS.
whites coils WITH THE capacitor in TX side are not fitted tesoro schematics. really THIS CAPACITOR IS THERE, IN TGSL TOO, BUT in THE TX generator, as THE PART of IT. CAP IN BOTH CASES set THE FREQUENCY OF A DETECTOR just cause L * C gives THE (F) VALUE,
KILO-HERTZ.

so Muske... has or not the capacitor... no data... ABSENT. minelab often uses PREAMP in their coils.
NO DATA there is the preamp in Muske coil or not.

[seadoggy]

one ukrainian asked me to give him a front panel pic that I have not. his shield has waded off in time of long
hunting. can anyone share it? in format Front Designer 3.0, jpeg or gif no difference all will be appreciated.
TIA
[ATTACH]34418[/ATTACH]

Can i use Musketeer coil with TGSL board??,
long time i read here i must use small pcb made for Musketeer coil but i cant find here.

[kt315]

one ukrainian asked me to give him a front panel pic that I have not. his shield has waded off in time of long
hunting. can anyone share it? in format Front Designer 3.0, jpeg or gif no difference all will be appreciated.
TIA

[siimkuningas]

good work

[paku]

this is my video before i sell it hahahaha

[Koala]

Thank you WM6

info on coil here

[pigeon]

Thank you WM6

What Google translate say:

hi all

this is the first time I manufacture a VLF coil. I beg of you all to kindly help me, cause I really do not know how to do

thank you all

[WM6]

hi all

c'est la premiere fois que je vais realiser une bobine vlf . je vous prie tous de bieb vouloir m'aider vraiment je n'est aucune idée

merci a tous

What Google translate say:

hi all

this is the first time I manufacture a VLF coil. I beg of you all to kindly help me, cause I really do not know how to do

thank you all

[Qiaozhi]

hi all

c'est la premiere fois que je vais realiser une bobine vlf . je vous prie tous de bieb vouloir m'aider vraiment je n'est aucune idée

merci a tous

Please read the forum rules, and make your posts in English.
Basic Rules of the Forums

[pigeon]

hi all

c'est la premiere fois que je vais realiser une bobine vlf . je vous prie tous de bieb vouloir m'aider vraiment je n'est aucune idée

merci a tous