Jeohunter - Visual Ground Scanner

[der_fisherman]

Hi, any new great discoveries at the secret remote project forum... ?

If you are getting a vertico just by watching you better
should not try this tecnique in real - you could end up
bumping into some trees, roots or other stuff.

Yeah, that's the way of "circle-scanning"!
Either you like it or not.
It may feel great to be the "gravity center" of your own world...

btw. if you only look straight at the coil and make a counterturn
when you found something usual you won't get very dizzy.

However it is the only real efficient way if you want to
look for treasures at sites where not every centimeter lies
a target.
Even 1 person holdable eliptical DD 1m coils could be
realizable which would be much better because you
could cover around 4 meters of diamater in one turn!


attached: the Jeohunter video (as another backup)

Firstly thanks for posting so that we can all see it.
I got a bit dizzy too! How is spinning around any better than normal MD scanning? I miss the reasons for doing that....at least the usual method clears/checks a "path" about a meter wide. But you only check the circumference of a circle, so I guess that you must move slowly at a rate of the width of the search head for each revolution made......if you are a classically trained ballet dancer, you might handle it, but I would fall over in the first 5 minutes.....
Sad that you did not show us what it was you actually found either, what was it?
regards
Andy

[Funfinder]

I eventually managed to download the file using "deposit files", after following a somewhat convoluted process, and having to enter the special code twice. After watching the video, I now feel a bit dizzy and a little nauseous.
It would have been better if you had compressed the file in rar format, then split it into 1MB chunks and posted them here.

Hi, any new great discoveries at the secret remote project forum... ?

If you are getting a vertico just by watching you better
should not try this tecnique in real - you could end up
bumping into some trees, roots or other stuff.

Yeah, that's the way of "circle-scanning"!
Either you like it or not.
It may feel great to be the "gravity center" of your own world...

btw. if you only look straight at the coil and make a counterturn
when you found something usual you won't get very dizzy.

However it is the only real efficient way if you want to
look for treasures at sites where not every centimeter lies
a target.
Even 1 person holdable eliptical DD 1m coils could be
realizable which would be much better because you
could cover around 4 meters of diamater in one turn!


attached: the Jeohunter video (as another backup)

[Funfinder]

Hi geo-i, my brave friend , hope you're still relaxed and confident.

OK, the above flat-ribbon cable is attached correctly.

And if you haven't done anything with the left flat-ribbon cable
then there's no way for any problem with it.

If it's the same front touch-pad panel as you see below
then the connections have to be identical.


What we do now is to narrow the fault:

1. create lamp-battery circuit, unplug reset button cable
and test if lamp only shines while new reset button is
pressed (if lamp always shines: find and remove the
shortcut or damaged button and test it again)

2. unsolder the both wires near the flat ribbon
cable and test if Jeohunter is working OK now

3. plug reset button cable and test if lamp
only shines while new reset button is pressed
(if lamp always shines:
find and remove the shortcut and test it again)

4. carefully resolder the both reset button wires
(don't create any soldering shortcuts)

ONLY while you press the button the test-lamp should burn
or the Multimeter electricity should flow.

Please show me picture of "window screen goes like crazy".
Good luck.


PS.
Below you can see my newest microscopical work:
Casio LCD-TV net-adapter plug minus to plus reversed
(the area was 1x1cm) and attaching an antenna connector.

[Qiaozhi]

No!
Because this is the most sensible manner!
What problems do have now again?

I eventually managed to download the file using "deposit files", after following a somewhat convoluted process, and having to enter the special code twice. After watching the video, I now feel a bit dizzy and a little nauseous.
It would have been better if you had compressed the file in rar format, then split it into 1MB chunks and posted them here.

[geo-i]

touch pad& flat ribbon

hello my friend fun finder here is the picture of the attached
flat ribbon &touch pad panel bro .but i have a another problemo
with the window screen goes like crazy bro please help SOS
i hope you can finish this problem.thanks



regards
geo-i

[der_fisherman]

No!
Because this is the most sensible manner!
What problems do have now again?

Trying to find it.

[Funfinder]

No!
Because this is the most sensible manner!
What problems do have now again?

[der_fisherman]

http://www.qooy.com/files/0CBWPHOCFQ...rch_Method.zip

Can you post a link that works in a sensible manner....Thanks in advance.

[Funfinder]

Jeohunter @ Full Highspeed !!!

http://www.qooy.com/files/0CBWPHOCFQ/Jeohunter_Highspeed_Whirlwind_Search_Method.zip

[Funfinder]

Hi geo-i,

my big respect! You are the first who tries the reset button mod!

You will see this will work perfect!


But first I will help you to find the error.

We will find the problem very fast because this is just a simple multiple on-off switch configuration!


If you press a touchpad button, a contact will be closed:

from the (both connected) signal-line contacts to the corresponding button (see below)

What I can see is: you have soldered the wires in the right way but you may have forgotten to attach the flat ribbon cables after the work or you have plugged them in from the wrong side!

Attach the flat ribbon cables in the exactly same way as they have been before.
Both should describe a bow form from outside view.
And make shure there is no permanent contact between the new cables,
the both connectors/plugs or the switch / little pressable button you want to use.

Please show me a picture of the attached flat ribbon cables and of the touch-pad panel so I know this is the same.

[geo-i]

tried double check

hello friend perhaps you are mistaken
please tried double check again bro
when i try to install the joehunters
the screen ground balance it sound
repetitive and the ground balance
cannot be adjust switched cannot
move are you test the device bro
what happen and the problemo .thanks bro



regards

geo-i

[geo-i]

reset button modification

hello my friend fun finder can you help me i try to build
reset button modification as you show but all recipes is
enough i thing why the functions is not right are you
sure the connection circuit that you give is correct ?
i hope you can help see picture



regards
geo-i

[geo-i]

Wrong Question

hello my friend sorry for the wrong Question i ask
it right what you guess i wanna watch cavity detection
video bro sorry again bro never mind may be the snow
give me a challenge to see the cavity over there bro
i hope can found the ceilling and not too thick thank for
whish my fever now it get better




regards
geo-i

[Funfinder]

Hi geo-i,

I hope you are fine and now cured from flue or fever.

You know my video of the iron-bunker-tunnel-door already

http://www.multiupload.com/TEDJC0QC8W

detected from around 2.7 meters and I guess you wanna
watch a cavity-detection-video.

At the moment we have 1m of snow here so I can't
shoot such a clip.

geo-i, first you have to find out if this is really the ceiling of
the bunker or it is just an area with concrete on the ground.

If it is the bunker you should get a different signal near
the below strong walls of the bunker at the borders where
the signal starts.


But if the concrete ceiling is very thick you might get no
different signal.

In that case the only way to find out if this is really the
bunker is to bury a deep hole where the concrete starts
so you can find out if this is the outside concrete-wall
of the bunker or if it is just a thin layer of this stuff
(but I think this is not a thin concrete, otherwise
you wouldn't get this strong cavity detection).

Maybe you should find something to blow the concrete.

[geo-i]

video joehunters

hello my friend fun finder do you have a
video finding tunnel or bunker with the
joehunters detector can you send to me
i hope so thanks.