IDX-PRO+VDI

[ivconic]

I am waiting Your pracical results,
Then we will laugh for all.

Don't peek me, because once i decide to do it - be sure i will do it!
I am not so naive to believe that only character strings are need to be replaced.
There is a little catch also - and i know it!
I saw it!
Peekaboo - i can see you!

[holyuser]

First pass: to correct character table...

retlw 32 ; H'20' B'00100000' " "
retlw 65 ; H'41' B'01000001' "A"
retlw 67 ; H'43' B'01000011' "C"
retlw 72 ; H'48' B'01001000' "H"
retlw 84 ; H'54' B'01010100' "T"
retlw 85 ; H'55' B'01010101' "U"
retlw 78 ; H'4E' B'01001110' "N"
retlw 71 ; H'47' B'01000111' "G"
retlw 32 ; H'20' B'00100000' " "
retlw 77 ; H'4D' B'01001101' "M"
retlw 73 ; H'49' B'01001001' "I"
retlw 78 ; H'4E' B'01001110' "N"
retlw 69 ; H'45' B'01000101' "E"
retlw 78 ; H'4E' B'01001110' "N"
retlw 33 ; H'21' B'00100001' "!"
retlw 32 ; H'20' B'00100000' " "
*********************************************
retlw 32 ; H'20' B'00100000' " "
retlw 73 ; H'49' B'01001001' "I"
retlw 86 ; H'56' B'01010110' "V"
retlw 67 ; H'43' B'01000011' "C"
retlw 79 ; H'4F' B'01001111' "O"
retlw 78 ; H'4E' B'01001110' "N"
retlw 73 ; H'49' B'01001001 "I"
retlw 67 ; H'43' B'01000011' "C"
retlw 32 ; H'20' B'00100000' " "
retlw 73 ; H'49' B'01001001' "I"
retlw 71 ; H'47' B'01000111' "G"
retlw 83 ; H'53' B'01010011' "S"
retlw 76 ; H'4C' B'01001100' "L"
retlw 51 ; H'33' B'00110011' "3"
retlw 32 ; H'21' B'00100000' " "
retlw 32 ; H'20' B'00100000' " "

I am waiting Your pracical results,
Then we will laugh for all.

[ivconic]

First pass: to correct character table...

retlw 32 ; H'20' B'00100000' " "
retlw 65 ; H'41' B'01000001' "A"
retlw 67 ; H'43' B'01000011' "C"
retlw 72 ; H'48' B'01001000' "H"
retlw 84 ; H'54' B'01010100' "T"
retlw 85 ; H'55' B'01010101' "U"
retlw 78 ; H'4E' B'01001110' "N"
retlw 71 ; H'47' B'01000111' "G"
retlw 32 ; H'20' B'00100000' " "
retlw 77 ; H'4D' B'01001101' "M"
retlw 73 ; H'49' B'01001001' "I"
retlw 78 ; H'4E' B'01001110' "N"
retlw 69 ; H'45' B'01000101' "E"
retlw 78 ; H'4E' B'01001110' "N"
retlw 33 ; H'21' B'00100001' "!"
retlw 32 ; H'20' B'00100000' " "
*********************************************
retlw 32 ; H'20' B'00100000' " "
retlw 73 ; H'49' B'01001001' "I"
retlw 86 ; H'56' B'01010110' "V"
retlw 67 ; H'43' B'01000011' "C"
retlw 79 ; H'4F' B'01001111' "O"
retlw 78 ; H'4E' B'01001110' "N"
retlw 73 ; H'49' B'01001001 "I"
retlw 67 ; H'43' B'01000011' "C"
retlw 32 ; H'20' B'00100000' " "
retlw 73 ; H'49' B'01001001' "I"
retlw 71 ; H'47' B'01000111' "G"
retlw 83 ; H'53' B'01010011' "S"
retlw 76 ; H'4C' B'01001100' "L"
retlw 51 ; H'33' B'00110011' "3"
retlw 32 ; H'21' B'00100000' " "
retlw 32 ; H'20' B'00100000' " "

[holyuser]

Don't be so sure!
Wait and see....

I am sure, You will see...

[ivconic]

Sorry, though I will disappoint you, you cannot remove these in no manner.

Don't be so sure!
Wait and see....

[holyuser]

Anyway , that "Achtung Minen" WILL BE REMOVED FOR SURE!

Sorry, though I will disappoint you, you cannot remove these in no manner.

[ivconic]

I am not worry, You must be worry about Yours void work
I will be waitinng Your practical results.

I don't worry.
My work is my metal detector and this VDI is just nice addon i can decide to apply or not.
I will apply it on existing detector and later see. If it is good - than i will keep it.
But i agree that "Achtung Minen" is unnecessary note there.
It is much better if author put his name there..
..
Anyway , that "Achtung Minen" WILL BE REMOVED FOR SURE!

[holyuser]

I don't have prepared pcb yet. Will do soon.
I know what are you expecting!
Don't worry...i know hot to bypass such jokes!

I am not worry, You must be worry about Yours void work
I will be waitinng Your practical results.

[ivconic]

"...

retlw 32 ; H'20' B'00100000' " "
retlw 65 ; H'41' B'01000001' "A" -------- retlw 73
retlw 67 ; H'43' B'01000011' "C" -------- retlw 86
retlw 72 ; H'48' B'01001000' "H" -------- retlw 67
retlw 84 ; H'54' B'01010100' "T" -------- retlw 79
retlw 85 ; H'55' B'01010101' "U" -------- retlw 78
retlw 78 ; H'4E' B'01001110' "N" -------- retlw 73
retlw 71 ; H'47' B'01000111' "G" -------- retlw 67
retlw 32 ; H'20' B'00100000' " " etc...etc..etc.........
[/I]"

..."

How about this?

Instead Quoting - i edited it!
Never mind.. point is still here..

[ivconic]

Very good!
Now test Your modified .hex in real.

I don't have prepared pcb yet. Will do soon.
I know what are you expecting!
Don't worry...i know hot to bypass such jokes!

[holyuser]

Piece of cake!


"...
bsf STATUS,5
movf REGEA,W
bcf STATUS,5
addwf PCL,F
retlw 32 ; H'20' B'00100000' " "
retlw 65 ; H'41' B'01000001' "A"
retlw 67 ; H'43' B'01000011' "C"
retlw 72 ; H'48' B'01001000' "H"
retlw 84 ; H'54' B'01010100' "T"
retlw 85 ; H'55' B'01010101' "U"
retlw 78 ; H'4E' B'01001110' "N"
retlw 71 ; H'47' B'01000111' "G"
retlw 32 ; H'20' B'00100000' " "
retlw 77 ; H'4D' B'01001101' "M"
retlw 73 ; H'49' B'01001001' "I"
retlw 78 ; H'4E' B'01001110' "N"
retlw 69 ; H'45' B'01000101' "E"
retlw 78 ; H'4E' B'01001110' "N"
retlw 33 ; H'21' B'00100001' "!"
retlw 32 ; H'20' B'00100000' " "
bsf STATUS,5
movf REGEA,W

Very good!
Now test Your modified .hex in real.

[ivconic]

Here is whole ASM file:

[ivconic]

Piece of cake!


"...
bsf STATUS,5
movf REGEA,W
bcf STATUS,5
addwf PCL,F
retlw 32 ; H'20' B'00100000' " "
retlw 65 ; H'41' B'01000001' "A"
retlw 67 ; H'43' B'01000011' "C"
retlw 72 ; H'48' B'01001000' "H"
retlw 84 ; H'54' B'01010100' "T"
retlw 85 ; H'55' B'01010101' "U"
retlw 78 ; H'4E' B'01001110' "N"
retlw 71 ; H'47' B'01000111' "G"
retlw 32 ; H'20' B'00100000' " "
retlw 77 ; H'4D' B'01001101' "M"
retlw 73 ; H'49' B'01001001' "I"
retlw 78 ; H'4E' B'01001110' "N"
retlw 69 ; H'45' B'01000101' "E"
retlw 78 ; H'4E' B'01001110' "N"
retlw 33 ; H'21' B'00100001' "!"
retlw 32 ; H'20' B'00100000' " "
bsf STATUS,5
movf REGEA,W

[holyuser]

I can doing it .

Are You?
Then, please, give us You realy working .hex file without "Achtung Minen" message...

[aft_72005]

What do the three buttons on the VDI board do, and can I get rid of that silly "Achtung Minen" message at the start? I guess looking though the code for the hex values of the ASCII would find it and allow me to replace it.

I can doing it .