IDX-PRO+VDI

[mikebg]

"Achtung Gold !!!" would be fine

People, why you make fun of things that are quite serious. I think on front panel of metal detectors to be used icons warning holders of pacemakers and diggers in area where there may be UXO and power lines.

[WM6]

OK!
I will think over to change it in the new revision.
What about "Merry Christmas!", or "Happy Weekend!" ?

"Achtung Gold !!!" would be fine

[holyuser]

Achtung mines is bad, sounds to me like Nazi orders for digging in PO w camp

OK!
I will think over to change it in the new revision.
What about "Merry Christmas!", or "Happy Weekend!" ?

[Wiltran]

IDX

I agree with Ivconic on this one, Achtung mines is bad, sounds to me like Nazi orders for digging in PO w camp, but Holyuser,
This is your call! I appreciatey your contribution!

[holyuser]

More difficult will be to obtain more enclosures, because i don't have anymore of those...

Don't be sad!
It's time to obtain newest type of enclosures, with convenient front panel to put there LCD.

[ivconic]

Now you will have to redesign the front panel.

Not so tough task. More difficult will be to obtain more enclosures, because i don't have anymore of those...

[Qiaozhi]

Now when you talking...
Splendid "match up" !

Now you will have to redesign the front panel.

[ivconic]

I thought it was the IGSL logo.
Two heads to indicate non-ferrous and ferrous at the same time, but with different voices (tones).

Now when you talking...
Splendid "match up" !

[ivconic]

Hi ivconic
Are you test your manipulation software in real ,??? I am interesting about result.
Regards.

No, i decided to give up from this.
Cheers!

[holyuser]

Does the VDI PIC measure the reflected phase angles of the different metals off the comparator and then display them on the LCD? Can anyone explain? thanks

The PIC calculates arctangent (4-quadrant) of the powerest sample for period about last 0,3...0,5 seconds, and than display the result.

[Wiltran]

IDX

Does the VDI PIC measure the reflected phase angles of the different metals off the comparator and then display them on the LCD? Can anyone explain? thanks

[holyuser]

But you didn’t say, are you wrote program ? if you having ready VDI circuit .
Please test my manipulation software .

Hi aft_72005
Here You are the result: http://www.youtube.com/watch?v=JZtkxrOUcLQ

Let we spend our time for something more useful, than manipulate the code.
Belive me, it is not so easy, to produce working .hex file after any manipulation of code.
Regards.

[aft_72005]

Hi ivconic
Are you test your manipulation software in real ,??? I am interesting about result.
Regards.

[aft_72005]

Hi aft_72005
Did You tested Your "manipulated" .hex in real?
Let I guess, You did not, because if You did,
then You must be very very very dissatisfy.
Greetings!

But you didn’t say, are you wrote program ? if you having ready VDI circuit .
Please test my manipulation software .

[aft_72005]

Hi aft_72005
Did You tested Your "manipulated" .hex in real?
Let I guess, You did not, because if You did,
then You must be very very very dissatisfy.
Greetings!

No , I don’t test in real condition , but I did some changes in pulsedetector software included AVR microcontrollers .

Regards.