3D treats

[6666]

Thanks for shared to all for above uploaded..These are so beautiful,,,

I'm looking for 3D .stl file bolt & nut like this one, does anybody has it?[ATTACH]54214[/ATTACH]

That looks like a toilet seat bolt, check the hardware store.

[Op04]

Bolt & nut

Thanks for shared to all for above uploaded..These are so beautiful,,,

I'm looking for 3D .stl file bolt & nut like this one, does anybody has it?

[ivconic]

I picked up this from the internet.
I made small modification and added elements for better elastic band attachment.

[blobber]

Stick_28mm.zip

[bernte_one]

scale Spule stl to height you want, no infill but with at least two wall lines, or one very solid wall line, and several bottom layer, adjust flow of first layer to 120%
rest is at yours

you can also print one massive form to use it as positive form for vacuum forming

[blobber]

20 cm concentric.zip
Pinpointer.zip

[ripsdevala]

Elips DD
ellipse_DD.zip

[ripsdevala]

250mm DD
DD_250.stl.zip

[ivconic]

Ok, those who are having good will to share are welcome here to give their treats: