If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
If you have not successfully built the Voodoo circuit as it is designed then trying to convert HH+GB into a Voodoo-like hybrid will be exceptionally difficult. Build Voodoo first, get it working, and learn how it works.
I want to add only its DISC part. I don't want to reject Iron, just want to show it via a simple LED.
Do you think it works?
If you have not successfully built the Voodoo circuit as it is designed then trying to convert HH+GB into a Voodoo-like hybrid will be exceptionally difficult. Build Voodoo first, get it working, and learn how it works.
Before everything, i have to thank Mr. Qiaozhi for sharing his valuable information (Voodoo).
I read all of Voodoo posts and i think i realized his method about discrimination.
1- According to users tests, i should tune RX coil in 10Khz via adding resonance capacitor.
2- I must adjust DiscDelay so that i see a ringing form in O-scope at DiscPreamp output.
Mr. Surfdetector has shown the ringing in his video and post.
Dear Carl,
As you know, you helped me about adding GB process (based on 4 delays) in my HHD.
It works very nice and easily removes mineralization, while we can stay in lower delay (10-25us).
Now, i want to develop my HHD+GB by adding DISC part of VOODOO. I hope you accept to help me to do it.
Please see attached, i can add a separate delay + pulse-width in my HHD for DISC-Sample and connect it to 4066.
My problem is at final output (DISC_OUT). I think the out is DC voltage, do you think i can connect it to TL072 and turn on a simple LED (only for F)?
Actually, my purpose is that first a target is detected. Then, check its F/NF via this method.
Thanks.
Is it possible to tell me what method you have used for disc between F/N-F?
For exp, Checking voltage of TX (inductance) or etc.
With all due respect, all your questions are already answered in great detail within the 152 pages of the book: The Voodoo Project.
If you are having problems ordering a copy of the book from Amazon in your particular country, the Book Depository can supply copies with free delivery worldwide.
Thanks.
Do you think i can use DD coil of GPX series?
Unfortunately, i have not your book, i will try to buy it.
Please see attached, is it possible to guide me how to adjust R22 (TP4)?
Thanks.
[ATTACH]57567[/ATTACH]
I have not tried to use a GPX DD coil.
The trimmer is only there for experimentation purposes as explained on pages 20 and 21.
There are no guidelines on how this should be adjusted.
Thanks.
Do you think i can use DD coil of GPX series?
Unfortunately, i have not your book, i will try to buy it.
Please see attached, is it possible to guide me how to adjust R22 (TP4)?
Thanks.
Dear Qiaozhi,
I have some questions about your project, Vodoo.
Is it possible to tell me following values:
TX Pulse Width (us)
DISC Delay (us)
DISC Sample Pulse Width (us)
For reference, these values are shown in the book on pages 54 and 55.
PI TX Pulse Width: 10us to 180us
PI Sample Delay: 15us to 50us
PI Sample Width: 20us to 60us
DISC Sample Delay = 20us to 100us
DISC Sample Width = 10us to 100us
All of these values are adjustable from the menu system, and need to be determined for whatever coil you intend to use.
Or modify it to use a 2-stage preamp like the Minipulse Plus.
Dear Qiaozhi,
I have some questions about your project, Vodoo.
Is it possible to tell me following values:
TX Pulse Width (us)
DISC Delay (us)
DISC Sample Pulse Width (us)
I have a question about reaching to 100-120us range, TX pulse width.
Do you think i can reach the range if i change C8 from 10nf to 15 nf (like crossbow)?
Leave a comment: