Announcement

Collapse
No announcement yet.

Threshold Pot doesn't work

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • eduardo1979
    replied
    Originally posted by h9361 View Post

    Thanks.
    Dear eduardo1979, i want to make a receiver alone, not TX.
    Can you send me a link for fisher cz2?
    Thanks.
    If you have a schematic to share, post it here. Please read the Intro post for rules on posting schematics.

    Leave a comment:


  • Carl-NC
    replied
    There is no "better" either way, you do what is needed to get the results you want.

    Leave a comment:


  • h9361
    replied
    Originally posted by Carl-NC View Post

    Again, I don't know without simulating it. It will also make a difference whether L3 and L4 are coupled (also polarity) or decoupled.
    Suppose that L3 and L4 are separated (independent ).
    Generally, do you think it is better to be used coupled or decoupled?

    Leave a comment:


  • Carl-NC
    replied
    All multifrequency designs I am aware of use a wideband RX coil and either do narrowband filtering in the preamp(s), or with filters after the preamp, or use narrowband demodulators. I don't know of anyone trying to use narrowband RX coils.

    Leave a comment:


  • h9361
    replied
    Originally posted by eduardo1979 View Post
    Hi h9361.
    Why don't you try implementing the TX circuit from the Fisher CZ5? I think it would be a good starting point.
    Thanks.
    Dear eduardo1979, i want to make a receiver alone, not TX.
    Can you send me a link for fisher cz2?
    Thanks.

    Leave a comment:


  • eduardo1979
    replied
    Hi h9361.
    Why don't you try implementing the TX circuit from the Fisher CZ5? I think it would be a good starting point.

    Leave a comment:


  • Carl-NC
    replied
    Originally posted by h9361 View Post
    Please check attached. Do you think the bandpass (from 15Khz to 107Khz) is true?
    Again, I don't know without simulating it. It will also make a difference whether L3 and L4 are coupled (also polarity) or decoupled.

    Leave a comment:


  • h9361
    replied
    Originally posted by nejdet View Post
    Something like this maybe...
    thanks

    Leave a comment:


  • h9361
    replied
    Originally posted by moodz View Post
    here is a free online tool for desiging LC filters ( low, band, high )

    https://markimicrowave.com/technical...r-design-tool/

    It can export the design in ltspice so you can sim it.
    Thanks

    Leave a comment:


  • h9361
    replied
    Originally posted by Carl-NC View Post
    I suspect it's not so simple, and I don't know without either building the circuit or simulating it. But you can do that, so I suggest you put it in LTSpice and find out what happens.
    Please check attached. Do you think the bandpass (from 15Khz to 107Khz) is true?
    Click image for larger version

Name:	bandpassmain.jpg
Views:	123
Size:	88.3 KB
ID:	444863

    Leave a comment:


  • nejdet
    replied
    Something like this maybe...
    Attached Files

    Leave a comment:


  • moodz
    replied
    here is a free online tool for desiging LC filters ( low, band, high )

    https://markimicrowave.com/technical...r-design-tool/

    It can export the design in ltspice so you can sim it.

    Leave a comment:


  • h9361
    replied
    Originally posted by Carl-NC View Post
    I suspect it's not so simple, and I don't know without either building the circuit or simulating it. But you can do that, so I suggest you put it in LTSpice and find out what happens.
    I have not worked with LTSpice. I usually use Porteous software for simulation, i will try to simulate it.
    I have a another question. Please see again schematic of #618, do you have any suggestion for making a bandpass filter?
    For exp, i want to only receive from 5Khz to 30Khz range. Suppose that we have two coils ( inductor) and two resonance capacitors.
    First Tank is tuned to 5Khz and second is tuned to 30Khz. But i do not know how to draw a bandpass for this range via this coils and resonance capacitors.
    Thanks

    Leave a comment:


  • Carl-NC
    replied
    I suspect it's not so simple, and I don't know without either building the circuit or simulating it. But you can do that, so I suggest you put it in LTSpice and find out what happens.

    Leave a comment:


  • h9361
    replied
    Originally posted by Carl-NC View Post
    Any coil can do that as long as you don't resonate it with a cap.
    I want to receive only two or three frequencies at the same time.
    Please see attached, this is named as coupling mode (Tap).

    Click image for larger version  Name:	resonance.jpg Views:	0 Size:	44.0 KB ID:	444848

    A friend told me old radio used this method.
    I have a question, which of the following is true?

    Calculation 1
    F1=(L1+L2+L3)+C1
    F2=(L1+L2)+C2
    F3=L1+C3

    Or
    Calculation 2
    F1=(L1+L2+L3)+C1
    F2=(L2+L3)+C2
    F3=L3+C3​​

    Leave a comment:

Working...
X