Announcement

Collapse
No announcement yet.

Wanted "ADMIRAL"

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Nandor
    replied
    Hi
    Its good to check the signals produced by the circuit, like Tx and Rx or phase shifters output but you need a 2 channel for tuning the coil. Or you can use a multimeter to tune the coil.

    Leave a comment:


  • Zotchin
    replied
    Is this small oscilloscope enough or not for workingClick image for larger version

Name:	images (17).jpeg
Views:	1
Size:	73.4 KB
ID:	359331

    Leave a comment:


  • Nandor
    replied
    Looks promising Forged nails are very hard to discriminate even with a Tesoro.

    Leave a comment:


  • CEBRAIL
    replied

    Leave a comment:


  • CEBRAIL
    replied

    Leave a comment:


  • Zotchin
    replied
    Yes, I think the LMC6484 is impossible to find
    Every day we wait for work to finish
    To hold everything necessary and sometimes the day passes in vain

    Leave a comment:


  • getsa
    replied
    I doubt that with LF347 the detector will work correctly.

    Leave a comment:


  • Zotchin
    replied
    Originally posted by Nandor View Post
    Hi Zotchin
    Change the quad opamp LM324 to LMC6484 or LF347 and you will have a better detector.
    Great. thank you for help
    I'll tell you the what is the deference.

    Leave a comment:


  • Nandor
    replied
    Hi Zotchin
    Change the quad opamp LM324 to LMC6484 or LF347 and you will have a better detector.

    Leave a comment:


  • Zotchin
    replied
    Yes, you are right, especially about capacitors. I welded a socket to replace it. And in the crucial moment to discover the difference, the battery was depleted

    Leave a comment:


  • getsa
    replied
    Try to select ICs(opamps). Based on my previous experience there were situations achieving different results during experiment different opamps (pcb with sockets). Another suggestion is to experiment with different capacitors replaced paralel on Tx coil. The distance and threshold are changed sometimes significantly.

    Leave a comment:


  • Zotchin
    replied
    Originally posted by getsa View Post
    You should be able to hear that coin at 24-25 centimeters.
    Good distance but hard to do it

    Leave a comment:


  • Zotchin
    replied
    Originally posted by CEBRAIL View Post
    Tx1.162 MH 428nf 7.137khz rx8.60mh. 48nf 7.833 kHz txrx696hz
    I didn't measure rx frequency
    Good point I'll try it

    Leave a comment:


  • getsa
    replied
    You should be able to hear that coin at 24-25 centimeters.

    Leave a comment:


  • CEBRAIL
    replied
    Originally posted by Zotchin View Post
    Your goal is 35cm ok. For what?
    I build this one in the picture it is 2 tone by nikko i guess
    In air test i catch a coin 14mm between 15 and 17cm look picture . Is it good or bad?
    My language is arabic if you understand it will be good
    Maybe i will try to change some things
    Rx 08milivolt

    Leave a comment:

Working...
X