Pulse Star II (first analog version)

[jfrras]

I put sprint file for anyone who wants to play with it. The bottom layer is complete and well known. The top layer is almost complete, still missing a few tracks. Errors in the top layout can be corrected along the way. In finalising the layout, all the components need alignment fine tuning(all ducks in a row, so to speak)
A scheme can be traced from the layout, the last pieces of the puzzle will fall into place.
The resistors connecting to the sample delay switch are known. Most of the component values on the board I already know.

Please leave the part list of Pulse Star 2 . Or send to my email [email protected]

[dbanner]

I put sprint file for anyone who wants to play with it. The bottom layer is complete and well known. The top layer is almost complete, still missing a few tracks. Errors in the top layout can be corrected along the way. In finalising the layout, all the components need alignment fine tuning(all ducks in a row, so to speak)
A scheme can be traced from the layout, the last pieces of the puzzle will fall into place.
The resistors connecting to the sample delay switch are known. Most of the component values on the board I already know.

[aft_72005]

not quite there as yet. but close

Hi
nice work and thank you .

[dbanner]

not quite there as yet. but close

[ivconic]

I hope to make an analog pulse induction detector.

https://www.geotech1.com/forums/forum/technology/pi-technology/410294-my-agd-analog-detector-work

[ZOUjiarui]

There is no such thing as a free lunch

[Ruben2000]

I hope to make an analog pulse induction detector.

[Ruben2000]

I hope for help from friends on this topic.

[aft_72005]

Why doesn't anyone make a pulse g, it has full schematics and pcb available, just needs some effort, pulsar is a commercial device, no one will share it for free

I checked the pages of the Bulgarian Pulse Star in this forum some changes have been made in it, but it has not been determined in the end.
It is a research project.
did you make it? If you have the information, feel free to apply.

[aft_72005]

According to my studies, the German Pulse Star circuit is somewhat similar to Pulse Star G.
The German Pulse Star does not have a good discrimination.

[ZOUjiarui]

What is "pulse g" ?

pulse star g

[aft_72005]

Are you have picture from PCB another side ?

[milad.mohammadi13131]

pulse

[milad.mohammadi13131]

these pic that star posted are for me.
i was abale to copy the pulse star 2.
i asked for help here but no one helped me.....

[algan]

I don't like how the pulse star 2 power supply is made, other variants should be tested and maybe it will be better than the original.