Delta Pulse

[raff33]

I do not mean to replace MOS-FET with 7909. you add this IC for to supply all schematic by stabilised voltage. test all accumulators - this is your problem! one AA size unit must give you 9-10 A of current on your digital tester in full charged state! if you do not get this current - you do not get the stability NEVER MORE!

hi kt315 ,
test all accumulators - this is your problem! one AA size unit must give you 9-10 A of current on your digital tester in full charged state!
please if you can explaine me more , i am a beginner and many thanks..................
i see your photo ....what the diffirence deep by TM808 and your DP?

[raff33]

hi raff can you tell me 0.5mm wire = which a.w.g. copper

hi rajesh,
0.5mm wire #24 awg, i hope this site help you

http://www.powerstream.com/Wire_Size.htm

good luck

[kt315]

recovery at lake

[kt315]

this is good or not ?

if your DP is working good with this coil then this is good. much people did according this thread info and had got only unstable working schematic! so what my suggestions will cost now for you if you do nothing? from nothing you will get ONLY nothing! if you do anything you get the expirience and more info than I am able to give it you now and in the future!

[rajesh]

coil 17 inch

hi kt315 thank for help

Inductance0.4547 mHDC Resistance1.0443 OhmsWire Gauge20 AWGWire Diameter33.4 mils (1 mil = .001 in)Coil Length0.12 inCoil Inner Diameter17 inCoil Outer Diameter17.4676 inAverage Turn Diameter17.1717 inWire Length103.3974 feetCopper Weight0.3197 poundsTurns23Levels6.4017
this is good or not ?.................rajesh

[rajesh]

delta pluse coil

hi kt315,
my DP work stable but poor detecting ,a canet koka 40 cm..........verry poor ..........
with : R5=2.2k 1w ; R6=680R ; R23,24,25,26=4k7 5% ; D4=TL071 i didn't find LF357 ; C30=10.000uf ; irf840
coil=40cm diameter ,23tr ,0.50mm wire , resistance 2.6R
thanks for helping

hi raff can you tell me 0.5mm wire = which a.w.g. copper

[kt315]

Hi KT315.

Abot changing values on caps, cona this solve inestability on delta pulse?
My case is that some Delpa Pulse that i had build, have the problem of inestability, when you play with some controls like delay or threshold too.
Any way the detector keeps goood power detection, but has i said in some setup situations it gets somoe inestability.
Any ideas.
Thanks my friend
Regards
Nelson

hi Nelson. thinking it is normal you will get the sound increase if you turn/play the controls, especially in increase of their value side. DP is very sensitive STATIC schematic and every such action will give the sound increase. on every the turn/tune I also push the knob RESET. I get an unstability if the battery already has been discharged after some work. now I go with 300 us of POWER PULSE WIDTH.
trully

[kt315]

hi kt315,
you mean replace irf840 with 7909 ?
i find a mistake in compesant 1.5nf , now my DP is better it can detect a canet coka at 85cm , but is not stable
thanks for helping

I do not mean to replace MOS-FET with 7909. you add this IC for to supply all schematic by stabilised voltage. test all accumulators - this is your problem! one AA size unit must give you 9-10 A of current on your digital tester in full charged state! if you do not get this current - you do not get the stability NEVER MORE!

[nelson]

Hi KT315.

Abot changing values on caps, cona this solve inestability on delta pulse?
My case is that some Delpa Pulse that i had build, have the problem of inestability, when you play with some controls like delay or threshold too.
Any way the detector keeps goood power detection, but has i said in some setup situations it gets somoe inestability.
Any ideas.
Thanks my friend
Regards
Nelson

yes, certainly you can use 1,2-2,2 nF and the PC power supply. I use power supply from a modem for test and battery charge, with -5 and +12 V output.

[raff33]

did this mod, but still did not tested at nature. thinking it would be increase the stability. enjoy!

hi kt315,
you mean replace irf840 with 7909 ?
i find a mistake in compesant 1.5nf , now my DP is better it can detect a canet coka at 85cm , but is not stable
thanks for helping

[kt315]

did this mod, but still did not tested at nature. thinking it would be increase the stability. enjoy!

[raff33]

if you take a look on schematic you will note the data on them ramka coil - 16 turns on 1100 mm side length. this gives approx 450-500 uH.

hi kt315,
my DP work stable but poor detecting ,a canet koka 40 cm..........verry poor ..........
with : R5=2.2k 1w ; R6=680R ; R23,24,25,26=4k7 5% ; D4=TL071 i didn't find LF357 ; C30=10.000uf ; irf840
coil=40cm diameter ,23tr ,0.50mm wire , resistance 2.6R
thanks for helping

[rajesh]

17 inch coil for delta pluse

take stranded wire 2-2,5 mm diameter. your 22 AWG leave on another projects. it IS DEEPER! you must do all details VERY ELABORETED! ALL PARTS OF IT!

hi kt 315 what mean to say elaborted actually i need to know which guage of wire you are used 25 turns is about right for this coil with a 53.5" perimeter. This is equal to a 17" round coil.....rajesh

[kt315]

take stranded wire 2-2,5 mm diameter. your 22 AWG leave on another projects. it IS DEEPER! you must do all details VERY ELABORETED! ALL PARTS OF IT!

[rajesh]

hi kt 315 i have submit my coil image upper 13.5/13.5 inch squer size. this is right for delta pluse or wrong ?.....

Inductance0.485 mHDC Resistance1.7346 OhmsWire Gauge22 AWGCoil Length0.25 inCoil Inner Diameter17 inchCoil Outer Diameter17.1602 inAverage Turn Diameter17.0416 inWire Length107.0753 feetTurns24