Announcement

Collapse
No announcement yet.

Delta Pulse

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • kt315
    replied
    if you take a look on schematic you will note the data on them ramka coil - 16 turns on 1100 mm side length. this gives approx 450-500 uH.

    Leave a comment:


  • rajesh
    replied
    delta pluse coil

    hi kt 315 i'm using gary inductance calculator but i don't know which inductance is better for delta pluse i mean 300 uh or 350 uh or 400uh 0r 450 uh and which wire awg 22 or 26awg ............

    Leave a comment:


  • kt315
    replied
    rajesh, google net and you will see much on-line Inductance Calculator: Square Loop like this example.




    http://www.google.com/search?hl=en&q...f&aqi=&aql=&oq=

    Leave a comment:


  • rajesh
    replied
    coil for delta pluse

    this is my testing coil it working ..........

    Leave a comment:


  • rajesh
    replied
    delta pluse coil 17 inch

    hi kt315 i built delta plus it working good thank's to help. actually i need a know of delta pluse 17 inch diameter coil how many turn's and wire awg and inductance

    Attached Images

    Leave a comment:


  • steaua581
    replied
    Delta Pulse

    thank you kt315...
    when i"m done i will post results...
    regards
    Marius

    Leave a comment:


  • kt315
    replied
    Originally posted by Belief View Post
    Hi all

    My delta pulse is beeping with out coil .

    what is the problem ?

    can i use 9 volt battery for my delta pulse ?

    Thanks .....
    not, you can not use this 9 volts 170 mA*h battery. it has the too tiny capacity and small loadind current for DP working.

    Leave a comment:


  • kt315
    replied
    Originally posted by steaua581 View Post
    Hello,
    Can i use 1,2nF,2,2nF instead 1,5nF ...on C4 C5 C6 ? Also can i use to test my unit using a PC supply 12V ..10A DC..??
    Thank you
    Regards
    Marius
    yes, certainly you can use 1,2-2,2 nF and the PC power supply. I use power supply from a modem for test and battery charge, with -5 and +12 V output.

    Leave a comment:


  • kt315
    replied
    Originally posted by georgi.g.zhelev View Post
    Hi KT315! What are the parameters of the diode SITH121 OD ? I can not find it in the catalog.
    G.L!
    thinking you gives unright search data. STTH1210D
    Attached Files

    Leave a comment:


  • steaua581
    replied
    Delta Pulse Sniffer

    Hello,
    Can i use 1,2nF,2,2nF instead 1,5nF ...on C4 C5 C6 ? Also can i use to test my unit using a PC supply 12V ..10A DC..??
    Thank you
    Regards
    Marius

    Leave a comment:


  • georgi.g.zhelev
    replied
    D. PULS


    Hi KT315! What are the parameters of the diode SITH121 OD ? I can not find it in the catalog.
    G.L!

    Leave a comment:


  • Belief
    replied
    Hi all

    My delta pulse is beeping with out coil .

    what is the problem ?

    can i use 9 volt battery for my delta pulse ?

    Thanks .....

    Leave a comment:


  • Belief
    replied
    problem

    Good Pic KT315

    My delta pulse not work . beeping ....................................
    Attached Files
    Last edited by Belief; 03-09-2010, 02:35 PM. Reason: problem

    Leave a comment:


  • kt315
    replied
    hot winter photos from today testing.
    Attached Files

    Leave a comment:


  • kt315
    replied
    check all according this plan
    Attached Files

    Leave a comment:

Working...
X