Delta Pulse

[Toros]

hi George

that will be only good but my english is not so perfect to make it.
i began write some article for russian magazine but it is still not ended. also i have html from one russian Koliaj name
who was first done DP.
if who will agree to translate in english i will send him both texts.
i did pic you could see the Koliaj's text

http://storage7.static.itmages.ru/i/17/1006/h_1507279641_1337758_539ceb8677.jpg

thank you for support

KT 315 why are you giving incomplete information? The correct link is:

http://radioskot.ru/_fr/31/Delta_PULSE.pdf

Anyone who can read in Russian can take advantage of the file.

[star]

delta pulse

[6666]

answering i say you again. ALL VALUES on the PCB are correct. if you see BOM ok do like bom file.
if you think 12k you change on 10k you get unworking something that is only your delusion.

OK you win.

[kt315]

6666
you missed my point

this pic is open for you? what you see there?

http://www.geotech1.com/forums/album.php?albumid=83&attachmentid=40452

answering i say you again. ALL VALUES on the PCB are correct. if you see BOM ok do like bom file.
if you think 12k you change on 10k you get unworking something that is only your delusion.

two people emailed me about BOM file. so i did new BOM for them, backing to old values.
you do not see whole my correspondence. if someone is beginner i give info on zero level too.

[6666]

6666,
no reason to scratch off the resistor value just cause -----
--- values of XR71 are working
--- values of DP are working
--- my values are working.

i suggest you to begin to learn the f-g electronics... yes, the electronics. if you are newbie you must begin to read the useful books
not asking me why values same or not same. you are like blind squerell in the midnight hoping values will
change something, depth or what you imagine yourself... but not... no difference.

Kt315 you missed my point
let me try this a different way by asking this question

Is the schematic in post #3251 AND the BOM in post #3271 100% correct and are they both for the PCB you sell ?

[kt315]

my article, beginning

http://www.geotech1.com/forums/album.php?albumid=56&attachmentid=40699

[kt315]

hi George

that will be only good but my english is not so perfect to make it.
i began write some article for russian magazine but it is still not ended. also i have html from one russian Koliaj name
who was first done DP.
if who will agree to translate in english i will send him both texts.
i did pic you could see the Koliaj's text

http://storage7.static.itmages.ru/i/17/1006/h_1507279641_1337758_539ceb8677.jpg

thank you for support

[Qiaozhi]

6666,
no reason to scratch off the resistor value just cause -----
--- values of XR71 are working
--- values of DP are working
--- my values are working.

i suggest you to begin to learn the f-g electronics... yes, the electronics. if you are newbie you must begin to read the useful books
not asking me why values same or not same. you are like blind squerell in the midnight hoping values will
change something, depth or what you imagine yourself... but not... no difference.

cheers
write more good story. any mention of DP will be greatly appreciated just you do my day.

Hi Anatolij

May I suggest that you produce a Delta Pulse Build Document similar to those for the MiniPulse Plus and Geotech Baracuda designs. I can send you the Word document to use as a template.
It would make your life a lot easier.

I'm sure we could help you to correct the English if you have a problem.

[kt315]

your #2

[kt315]

your table book #1

[kt315]

6666,
no reason to scratch off the resistor value just cause -----
--- values of XR71 are working
--- values of DP are working
--- my values are working.

i suggest you to begin to learn the f-g electronics... yes, the electronics. if you are newbie you must begin to read the useful books
not asking me why values same or not same. you are like blind squerell in the midnight hoping values will
change something, depth or what you imagine yourself... but not... no difference.

cheers
write more good story. any mention of DP will be greatly appreciated just you do my day.

[6666]

Hi KT315
Don’t get mad OK ? I am just trying to help you, and I can only write this in English, and is given in good faith.

I have been trying to work out why some people have been having trouble making your delta pulse and why they ask questions about R39 and R40.

I have been reading through several threads about your DP.

The problem seems to be there is different information spread across several threads that do not match,
the latest schematic see post #3251, and the latest silk screen on your black PCB and your latest bill of material (bom) don’t match.

You may have published the latest component information somewhere buts its very hard to find it and combine all the information together.

For some reason only known to you, since you published your latest schematic and pictures of your PCB, you have changed the values in the BOM of R39 and R40, and has caused some confusion

This problem can be fixed very easy, so people can make your DP and get it working.

First remove all pictures of your latest PCB from your album etc,
then scratch off the resistor values of R39 and R40 from the silk screen of your PCB and take new photos ,
this will make it less confusing.

Next update the schematic with new values of R39 and R40.


The updated BOM, schematic and new pictures of PCB with values of R39 and R40 scratched off need to be published together on several threads I can list them if you want.
cheers
6666

[jezz]

I guess that is why you are still explaining the board 132 pages later

[kt315]

http://www.geotech1.com/forums/showthread.php?8003-Delta-Pulse/page127

post #3153

[kt315]

which is right ?????????

kt315 is always right. THATS MAIN RULE.