Announcement

Collapse
No announcement yet.

Delta Pulse

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Orbit
    replied
    Click image for larger version

Name:	20.jpg
Views:	1
Size:	444.1 KB
ID:	338703 strange my simulator ?says this !

    Leave a comment:


  • kt315
    replied
    do you see A SIGNAL TRANSFORMATION in this GIF? do you see your PNGs in this GIF?

    Click image for larger version

Name:	damping res tune.gif
Views:	14
Size:	203.5 KB
ID:	338702

    Leave a comment:


  • aaksts86
    replied
    Originally posted by kt315 View Post
    do you see what there written on R5????


    да вижу ... что р5 надо настроить .....но как правиль ето делать? на пример ... у меня катушка .. 40 диаметр и 3.7ом 0.550мхенр. .... поставил р5 от 500ом до 2к .... и чуика одинаково .. картина номер1 уменя с 500ом а картина номер2 с 1.8

    Leave a comment:


  • Speedy_G
    replied
    Originally posted by Orbit View Post
    [ATTACH]27598[/ATTACH]
    Thanks, Orbit.
    But the TeknolojiEkibi Demo you uploaded still gave error message as follows:

    Click image for larger version

Name:	PIC18_simul.JPG
Views:	1
Size:	18.4 KB
ID:	338701

    It seems that the Demo file could be damaged.

    Ciao

    Speedy_G

    Leave a comment:


  • chamin
    replied
    help sorry i don not how put a new post but i have construct a delta pulse 2 and dont work have sound but donot detect, when i conect the bobin transistor q1 is very hot and donot detect, somebody kenmy help, and i sorry i don speak ingles but i need help thank you

    Leave a comment:


  • Orbit
    replied
    GEOTECH 1 TEHNOLJOBI EKIBI DEMO YELZDIMIR KALAN KALAN.rar

    Leave a comment:


  • kt315
    replied
    circuit diagram

    Click image for larger version

Name:	dp_sch.gif
Views:	1
Size:	70.5 KB
ID:	338699

    Leave a comment:


  • kt315
    replied
    Originally posted by aaksts86 View Post
    hallo ... which lf357 pin6 signal it correct ? 1. or 2. [ATTACH]27595[/ATTACH][ATTACH]27596[/ATTACH]
    do you see what there written on R5????

    Leave a comment:


  • Speedy_G
    replied
    Originally posted by Orbit View Post
    [ATTACH]27558[/ATTACH]
    Hi Orbit

    It seems that your hex file cannot work in the the simulation program because there are incorrect checksums at the end of hexadecimal lines 7 down to line 18. So impossible to check if program will work as Demo OR Full (that is, without 200 on/off cycles).
    Please upload the corrected Geotech Serbia English version that can work, otherwise it's a waste of everyone's time.

    Thanks

    Ciao

    Speedy_G

    Leave a comment:


  • aaksts86
    replied
    hallo ... which lf357 pin6 signal it correct ? 1. or 2. Click image for larger version

Name:	1.png
Views:	1
Size:	3.2 KB
ID:	338697Click image for larger version

Name:	2.png
Views:	1
Size:	4.2 KB
ID:	338698

    Leave a comment:


  • mohandes
    replied
    Originally posted by kt315 View Post
    revision of the schematic. in P-CAD 2006

    [ATTACH]27502[/ATTACH]
    hi
    how much it ?
    can detect 15*15 on 5meter ???

    Leave a comment:


  • Orbit
    replied
    Even when you buy full version from turkey writes name and surname authors and teams !

    Leave a comment:


  • Orbit
    replied
    -inscription on the LCD GEOTEC SERBIA
    So this is the same HEX FAIL DELTA PULSE 2 diskriminacion !

    Leave a comment:


  • Orbit
    replied
    thanks kt ! In some posts is japp allegedly put hex fail English version for discrimination at which thought
    to change the welcome sign not the first and last name authors for example delta pulse as this is and as demo version I put hex code in which when pressed Home message lcd ,
    but I was irritated which were allegedly put the English version I have changed hex cod that much more work .
    and we have a way to hex cod working as the full version .

    Leave a comment:


  • kt315
    replied
    Orbit, he means asked this your HEX file for what? DP is fully analog detector, no need in PIC and ATMEL HEX files in it.

    Leave a comment:

Working...
X