Delta Pulse

[hg1898]

This is me I just finished DP, when the power is on a voice, without a voice, is how a matter

[hg1898]

This is me I just finished DP, open when a voice, without a voice, is how a matter

[pigeon]

Hi pigeon
- In normal PI MAX current,Higher electrical current to be in the range of 4 AMP depending on the diameter of the wire of the coil and IRF is enough.More AMP from this COIL will be burned and depending on this IRF heats & burned too.
-IRF740 A standard & typical for ~~all projects.
-For use two IRFP640 U NOT nead , U can use one do the work.
-And logical if you are using a battery 12V-7A from where you will get AMP higher than this!!!!!!!!!!!!
^^^^^^TO GO DEEP^^^^^^
-With all of the above taking into account the frequency and BW used.
-Good coil,good project
best time
j.

hi jap

thank you for your replay

best time

P.

[jap]

Hi pigeon
- In normal PI MAX current,Higher electrical current to be in the range of 4 AMP depending on the diameter of the wire of the coil and IRF is enough.More AMP from this COIL will be burned and depending on this IRF heats & burned too.
-IRF740 A standard & typical for ~~all projects.
-For use two IRFP640 U NOT nead , U can use one do the work.
-And logical if you are using a battery 12V-7A from where you will get AMP higher than this!!!!!!!!!!!!
^^^^^^TO GO DEEP^^^^^^
-With all of the above taking into account the frequency and BW used.
-Good coil,good project
best time
j.

[pigeon]

Hi pigeon
NO,,,,,Because (IGBT) needed control Module to run the gate,,,,,
-we not heard that the IGBT is used for a large coil----where that?????
best time
j.

hi jap

I have seen it on a French website but it does not matter. I suck in electronics but I could make the delta. I have an idea what I can use two IRFP460 aligned to increase the amperage that it helps to stabilize the delta and look deeply objects.

thank you very much for your respect

best time

P.

[jap]

Hi pigeon
NO,,,,,Because (IGBT) needed control Module to run the gate,,,,,
-we not heard that the IGBT is used for a large coil----where that?????
best time
j.

[pigeon]

hi jap

please I can remplace irf840 with (IGBT) IRGC28UPBF.I heard that the IGBT is used for a large coil.

thank you and best time

P.

[pigeon]

hi ALL

I search the adjustable 1 meter coil for use on delta pulse. I have the adjustable coil 50cm but it does not work with the coil 1 meter.

thank you

best time

P.

[Dalibor85]

With 25cm coil and LF351, 1euro detected at 20cm maximum. I already tried with other LF357 but not work. I will try in next days with LF356 and TL071. Thanks for replay, and sorry for my english.
Best regards.
Dalibor.

[jap]

Hi Dalibor85
-Check the surrounding components LF357,with copper tracks.
-What are the results with LF351?
-try another LF357
-try LF356 , TLO71
-Compare the results with each
---Supposed he was working with total---
best time
j.

[Dalibor85]

Hi everyone,
My DP dont work with LF357, but work with LF351.... Can anyone help me?
Best regards,
Dalibor.

[jap]

Hi pigeon
Simply look at this drawing and u will understand the value required of R adj.
best time
j.

[pigeon]

Hi pigeon
try
best time
j. [ATTACH=CONFIG]22487[/ATTACH]

hi jap

can you give me the exact mounting resistance AJ 5k?


thank you very much

best time

[kt315]

thank you jap and maikl. here is a charger schematic White's uses for XLT, DFX etc.

[maikl]

pls give a password on the ZIP. tia

password is "jap"