Magnetometer MWB2.

[Altra]

Nice project! Thanks for posting.

What proton-rich liquid did you find best for your sensor?

[Fisher]

Nice project! Thanks for posting.

What proton-rich liquid did you find best for your sensor?

I use purified kerosene.

[Altra]

Thank You Fisher

An old patent for a similar sensor

[j570]

Gerber files does not contain element descriptions or outlines. The lay6 file contains element outlines, but it's unclear which element it is, for example, R5 or R8. There are no letter symbols. Do you have a drawing or file that would solve this problem?

[j570]

I found this project interesting, so I decided to do it. It's not easy because, as I mentioned, there's no component layout, which is a bit tricky with SMD. I tried to create my own board layout, but I'm still missing a few components. I'm leaving out the resonant capacitors and the 220uF electrolytic capacitors. Can someone help?

[Badim33]

Fuse Bits ?

[Badim33]

fluze Bits there is ?

[Qiaozhi]

Добрый день не подскажите какие флюз биты при прошивке используются ?

Please read the forum rules -> Basic Rules of the Forums
and make your posts in English.

[ivconic]

https://www.aliexpress.com/item/1005...apt=4itemAdapt

[j570]

Interesting link about magnetometer fluid.
https://www.geometrics.com/community...-magnetometer/

[Badim49]

This is a very interesting project. Most likely there will be no firmware file (hex)?

do you have Fuses?

[Fisher]

Sorry for the long break. War. These are fuse bits in the Avreal programmer. https://real.kyiv.ua/avreal/
According to the description of this Avreal programmer, you can configure the fuse bits in another programmer.

c:\avreal\avreal32-1.29r1 -p1 +mega1284P -%% -o16000 -ab -5 -fJTAGEN=1,EESAVE=0,SUT=2,CKSEL=7,BLEV=1,BOOTRST=0, BLB1=1,BLB0=1,OCDEN=0,BOOTSZ=2,CKDIV8=1 -v -w
pause

[Badim49]

Sorry for the long break. War. These are fuse bits in the Avreal programmer. https://real.kyiv.ua/avreal/
According to the description of this Avreal programmer, you can configure the fuse bits in another programmer.

c:\avreal\avreal32-1.29r1 -p1 +mega1284P -%% -o16000 -ab -5 -fJTAGEN=1,EESAVE=0,SUT=2,CKSEL=7,BLEV=1,BOOTRST=0, BLB1=1,BLB0=1,OCDEN=0,BOOTSZ=2,CKDIV8=1 -v -w
pause

suitable for this

[Fisher]

Gerber files does not contain element descriptions or outlines. The lay6 file contains element outlines, but it's unclear which element it is, for example, R5 or R8. There are no letter symbols. Do you have a drawing or file that would solve this problem?

If you open a lay6 file in the Sprint Layout program, then when you hover over an element, the name of that element will appear.

[Fisher]

suitable for this

I don't know. I've never worked with PonyProg. I need to figure it out. Figure it out yourself. I have other things to do right now.