Serbian "Most Wanted"

[Ruben2000]

I'm missing some capacitors and the 100r trimpot I have to buy

Hello Emersonpaz.
Do you know if this resistance is important, it does not appear in the diagram?
you can see it in the link in # 156

https://www.geotech1.com/forums/showthread.php?25477-Hi/page7

[CEBRAIL]

https://youtu.be/fhYABLkXin4

[CEBRAIL]

Thank you g?rdal

[gurdal]

Thank you Gabriel Master
works great

[CEBRAIL]

https://youtu.be/_dYierEOFV4

[gurdal]

Hi all
Is there a coil inductance, resistance and frequency calculator all in one?

[gurdal]

Hello friend, I will follow according to Ivconic's specifications

The TX coil inductance can range from 1mH to 2.2mH and resistance from 2.5 to 3.5 ohms.
In the case of 1mH; the parallel capacitor is 474 + 473 in parallel.
In the case of 2.2mH; the parallel capacitor is 224.


RX = 160 windings, 0.27 mm wire
TX = 70-75 windings, 0.45 mm wire
In this case, the TX parallel capacitor is 220nF.

Thank you, Master Emersonpaz

[Ruben2000]

Hello friend, I will follow according to Ivconic's specifications

The TX coil inductance can range from 1mH to 2.2mH and resistance from 2.5 to 3.5 ohms.
In the case of 1mH; the parallel capacitor is 474 + 473 in parallel.
In the case of 2.2mH; the parallel capacitor is 224.

RX = 160 windings, 0.27 mm wire
TX = 70-75 windings, 0.45 mm wire
In this case, the TX parallel capacitor is 220nF.

What template are you using for the coil?

[Emersonpaz]

I'm missing some capacitors and the 100r trimpot I have to buy

[Emersonpaz]

Hello friend, I will follow according to Ivconic's specifications

The TX coil inductance can range from 1mH to 2.2mH and resistance from 2.5 to 3.5 ohms.
In the case of 1mH; the parallel capacitor is 474 + 473 in parallel.
In the case of 2.2mH; the parallel capacitor is 224.

RX = 160 windings, 0.27 mm wire
TX = 70-75 windings, 0.45 mm wire
In this case, the TX parallel capacitor is 220nF.

[gurdal]

starting SMW

hello master Emersonpaz;
smw detector what stage are you at?
What should be the coil resistance, inductance and frequency values?

Best regards
Gurdal

[Emersonpaz]

does anyone know if there are any Aliexpress DD coils that can be used in SMW?

[MartyJ1963]

Looking forward to the results Emersonpaz. Regards, Marty

[Ruben2000]

starting SMW

Good PCB !!!!

[Emersonpaz]

starting SMW