Hi Laith,
If you are looking for GS5 files, why do you not read those forum posts? Everything and much more info is there as well. You only need to read the forum posts.
It seems that you are the kind of person who want everything presented on a silver plate....but this will not work.
Announcement
Collapse
No announcement yet.
LOOKING FOR GOLDSCAN 4 Schematic.
Collapse
X
-
I had these boards produced at JLCPCB.com using the file that Eduardo1979 posted. The only modification was replacing the LT1114CN with a TL064CN using the Commander Mono Coil 11" coil. The ground adjustment allows for very good elimination of ferrous material.Originally posted by Laith View Post
Where you get them
As you can see in the video below, ground is at 50% and distinguishes ferrous material from a gold ring very well.
- Likes 1
Leave a comment:
-
Hello, I hope you’re doing well.Originally posted by Emersonpaz View Post
Regarding the GS5 circuit you built — does it not require any special components?
Do the components need any modifications, or does it work as is?
Leave a comment:
-
Emersonpaz Good work
Which is better metal detector for heavily mineralized soil : GS5 Lite or Delta pulse Sniffer XR71 ?
Leave a comment:
-
-
Два типа бифилярных катушек
Тесла 1. и Купер 2.
Attached Files
Leave a comment:
-
Jackpot in the beach
Leave a comment:
-
Hello everyone
, after almost a year I decided to finish Eduardo's GS-5 lite project, and I'll be honest, I found it very good and it works perfectly. Thank you Eduardo
for sharing this magnificent project. I made a short video to demonstrate how it works. I'm not using a suitable coil for it, it's the same one I use on the Polish pi.
- Likes 1
Leave a comment:
-
They should both be about the same, and I would use a mono coil with both.
- Likes 1
Leave a comment:
-
Ok, Carl. Thank You. The TDI is Best with DD for gold nuggets? or GoldScan With Mono Coil?
Leave a comment:
Leave a comment: