Announcement

Collapse
No announcement yet.

Surf PI Pro

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • bernte_one
    replied
    hello

    who has pcb layout file or black white image of it?

    greetings bernd

    Leave a comment:


  • BillNEWAST
    replied
    Use IrfanView and make sure that All the Plugins are applied.
    This is a Free Must Have Image Viewer and Editor.

    Sincerely
    Bill Adams

    Leave a comment:


  • ApBerg
    replied
    JPG

    Originally posted by golfnut View Post
    Hi I can see its a png file but my ol XP is struggling with this.

    Anyone re-post it as a jpeg pls

    Steve
    Hope this is ok

    Best regards
    Attached Files

    Leave a comment:


  • maikl
    replied
    Here are the PNG but no problem (lower resolution)...
    Attached Files

    Leave a comment:


  • golfnut
    replied
    Hi I can see its a png file but my ol XP is struggling with this.

    Anyone re-post it as a jpeg pls

    Steve

    Leave a comment:


  • TH Jim
    replied
    Thanks Carl for the schematic,

    I have already changed my SMPI to be more like the Pro and like the results!

    Very useful!

    Cheers, Jim.

    Leave a comment:


  • Dr Vel
    replied
    100 pf is not going to relate to any resonance at audio frequencies with the piezo phones. My guess would be to reduce a pink noise hiss in the phones. One question I have is does anyone see a reason dynamic phones could not be used if a capacitor of say 0.22 uF poly was put in series at point 1 to block the DC current flow.

    Leave a comment:


  • Alexismex
    replied
    Thank you very much i have to test in vitro to see the result.......

    Leave a comment:


  • kt315
    replied
    Originally posted by Alexismex View Post
    Hello Carl,
    Thank for this good schematic, can you tell me what is the real purpose of C1???
    it has relation to piezodielectric phone use imo... may be it is so specific... you need to decrease resonanse effect of it?

    Leave a comment:


  • Carl-NC
    replied
    Originally posted by Alexismex View Post
    Hello Carl,
    Thank for this good schematic, can you tell me what is the real purpose of C1???
    Don't know, unless it is primarily for the clicker version. Or, it may take a little harshness out of the audio.

    Leave a comment:


  • homefire
    replied
    My Guess is to take the Scratch noise out of the Pot Moving! LOL

    Leave a comment:


  • Alexismex
    replied
    Hello Carl,
    Thank for this good schematic, can you tell me what is the real purpose of C1???

    Leave a comment:


  • ApBerg
    replied
    Wow ! Thanks !

    Clear schematic from a very good nice working PI detector !

    Think we all Love Carl !!

    Leave a comment:


  • bernte_one
    replied
    nice!

    love the way you fit in the pots, no more irritation about the right direction.

    who can make a small pcb lay file? (black white)

    regards bernd

    Leave a comment:


  • homefire
    replied
    Bummer! All I see is the blank scheen.

    Leave a comment:

Working...
X