TESORO GOLDEN SABRE

[Ropcsika]

Ok thanks and what is K1 K2 K3

Discrimination switch connection point

[paku]

Ok thanks master

[eduardo1979]

K1, K2, K3, is the switch to the Disc and All Metal modes. K1 and K3 are connected to pins on the switch side, and K2 is connected to the central pin of the switch.

[paku]

Ok thanks and what is K1 K2 K3

[eduardo1979]

That is correct. This is the discrimination potentiometer.

[paku]

i need help how to wire this potentionmeter on this P10 P20 P30 is that right or not on my picture

[eduardo1979]

VDI LCD 2x16

[ATTACH=CONFIG]24487[/ATTACH]
Can i put This LCD To TGSL-Edu
If Can, How To Connect it
if any one have tutorial about how to put this LCD to TGSL-Edu Can You Share Here!

VDI GEOTCH

[paku]

Can i put This LCD To TGSL-Edu
If Can, How To Connect it
if any one have tutorial about how to put this LCD to TGSL-Edu Can You Share Here!

[satdaveuk]

Hi
Nice build,
All you need to do now is install the electronics into a metal housing make sure there is good bonding from earth to coil plug and pots and all should work well.

[Zs_21]

here some pictures,soon i got the video.

[Davor]

Can you make a video to show us what is going on?

[Zs_21]

Hi all!
I built the TGSL and there is a problem with it.When I touch the Ground balance or Disc level pot cable,have fail signal.Im paird the resistors and capacitors.
pls help (sorry for my bad english)

[dfbowers]

Hi to all

what is deep sensetive of TGSL or what is last deep sensetive of tgsl .

thanks

That depends on many things. The easiest thing to do is buy a kit from silverdog.
Then you have coil size and type, ground conditions and ambient noise which all have a very significant impact on final results. Then, finally, it depends on whose hands you put it in.

[mrmr16]

Hi to all

what is deep sensetive of TGSL or what is last deep sensetive of tgsl .

thanks

[golfnut]

Cheer Dave,

I dont have a TGSL, just IDX.

can you put a pic of your gold!
S