IDX-PRO+VDI

[Koala]

try

http://youtu.be/ZhQ9RRIKq58

and

http://youtu.be/kSI-kDSXx64

Not sure why there is a problem works for me and is set for public.

Never used youtube before so if someone can point me in the right direction

[mohandes]

Measured with cheap meter and batteries at 11.1V
29 and 31ma for the two modes on my detector no LCD no target.
97ma with sound threshold turned up in PP mode

my dear friend
i can not download it , these links have errors .
regards

[kt315]

Mohammed could not went through needle eye while you want split out the bronze from the gold.

[ossamaussama]

who know how to distinguish between gold alloy and bronze using disc mode?

[Waka]

thanks Koala.

[Koala]

Measured with cheap meter and batteries at 11.1V
29 and 31ma for the two modes on my detector no LCD no target.
97ma with sound threshold turned up in PP mode

[Waka]

Hi, Can anyone tell me which is the consumption of this circuit??

regards

Sorry for my bad english.

The question is How many current (mA) need this circuit?

regards

[Koala]

<span class="watch-page-link"><a target="_blank" href="http://youtu.be/kSI-kDSXx64">

ferrite for testing on the bench normally use the ground I am detecting on and pump the coil up and down. In the video set to the balance point normally have it slightly positive (sound slightly raises). Also sometimes adjust the ground balance to lessen false signals by hot or cold rocks.

[Koala]

thanks man
i wait for you , and i sure about your video is complete teaching for me

<span class="watch-page-link"><a target="_blank" href="http://youtu.be/ZhQ9RRIKq58">

rusty nail
large rusty bolt
bottle top
thin silver coin

[mohandes]

Hi, Can anyone tell me which is the consumption of this circuit??

regards

what ???

[Waka]

Hi, Can anyone tell me which is the consumption of this circuit??

regards

[mohandes]

no guru teaching me by your videos befor mr koala
regards

[mohandes]

Okay I will put a video of disc when I get back if nobody answers first. Going away for a two days cycling got a 5 am start so signing off for now.

thanks man
i wait for you , and i sure about your video is complete teaching for me

[Koala]

Okay I will put a video of disc when I get back if nobody answers first. Going away for a two days cycling got a 5 am start so signing off for now.

[mohandes]

ok
i put disc on ccw fully then check it.
i first think reject the ferrite next ferrite the iron.
EDIT :
i put disc on fully cw and next push zero buttom (set point ) and turn geb pot to find reject point (not reject well )then release zero.
but now again can not reject the ferrite and iron in cw mode for disc , so maybe my coil have problem or problem in me ????(my friend i do every think you say and very ask to you ,so sorry ,but i need discrimination , if you can put here a video for guide me more better. )
regards