IDX-PRO+VDI

[CDI]

Fixed and last version.

[CDI]

I will upload soon fixed pcb. Also, work with old gerber, i just maked small mistake in drawing but nothing special.
One of mistake 39K resistor connection, another mistake is when i placed trimmer for sens.
Nice work gurdal.

[gurdal]

ıdx pro test video

Hello friends
idxpro very nice
However, the potentiometer can be mounted on the PCB.
Cables Distress
oscillation

Best regards
Can you draw the pcb together with the potentiometer and other buttons?

[wallker]

Hi gurdal, good job.
I'm interested in fixes that you applied?
All i know is one bad connection on PCB, is there anything else?

[gurdal]

Hello CDI;

IDX PRO smd pcb thanks for gerber.

works great with a few fixes

[TufaN]

Hello to everyone. I want to make DD coil with 32 cm diameter. can you give information about coil wire thickness and number of turns?

[markantony]

This is my IDX PRO, made under the EDUARDO scheme.Coil - 27sm -2D https://youtu.be/NkdqAtK_pzs

[gerson]

https://drive.google.com/open?id=1a3yX0m_GjiLQAU1x2NRNvf7gqKzbHq1s

https://drive.google.com/open?id=1l_OVjMb3_y7uAS15pWP7gM6V0lzlf1f1

pcb board with tin bond .



see the link.: https://youtu.be/Wg928Gb_PsM

[gerson]

https://drive.google.com/open?id=1_URRnD1wNwrEqRBvnuRU7HLL81ec7org

https://drive.google.com/open?id=1S0BAf71bA01Mly5uMZqItEVVlKQIV8Td

my home plate IDX PRO

[gerson]

https://drive.google.com/file/d/1myqihL-sDAcJD9-UlSMSZq0A9Goi5Y5V/view?usp=sharing

To help those who are wanting to get started on this project, I leave here the PCB link in black and white EDITED for printing two versions of your choice.

[gerson]

Hello CDI. You have already achieved the TLC 2262cp CI for your UMX2. If you can not tell me where you live (COUNTRY ADDRESS) I try to send you a new sample that you have here in a local electronics store.

[wallker]

Tnx CDI.

[CDI]

Gerber IDX.rar

Inside this file is lay6 file and gerber doc's.

[CDI]

Looks awesome CDI.
Are you willing to share that nice layout?

Yes, why not... when arrive to home tonight.
But, this pcb isn't checked yet. Next week when i got all material's i will know if there are mistake's...

[wallker]

Looks awesome CDI.
Are you willing to share that nice layout?