IDX-PRO+VDI

[manu72]

You may use your PC-s audio input and simple oscilloscope software to tune your coil. It worked for me.

Hello, thank you for responding, I can explain in more detail? I can make a schematic?

[Davor]

You may use your PC-s audio input and simple oscilloscope software to tune your coil. It worked for me.

[manu72]

Hi, I just finished this project, but i have no oscilloscope, to annul coils, i wonder if there's another way or dishes there are compatible for this detector.

[kt315]

wrote many times that those are 1N4148. one russian guy drawing the schematic reduced the signs.

[maxm3s]

hello someone could pass me the list of correct components because not identified in Table 4 diodes in the list there are more componentes d1 to d9.

[mhak1]

Don't think anyone has published one. If you are using a Silverdog PCB its easy enough to take photo print it of and cross each component off as you order it.

Watch the size of the capacitors

I would advise you to buy the IC's from a large suppler like RS Farnell or Mouser.

Then you can study the specs from each manufacture and pick the best. Doubt there is much to be gained but each little bit adds up

thanks
Unfortunately I do not speak English and I use Google Translate please put the final files Sprint

[Koala]

hi all
Please recent changes to partslist and the pcb

Don't think anyone has published one. If you are using a Silverdog PCB its easy enough to take photo print it of and cross each component off as you order it.

Watch the size of the capacitors

I would advise you to buy the IC's from a large suppler like RS Farnell or Mouser.

Then you can study the specs from each manufacture and pick the best. Doubt there is much to be gained but each little bit adds up.

[mhak1]

hi all
Please recent changes to partslist and the pcb

[scrungy_doolittle]

There is a black conductive foam that they often use to ship I/C's in. I bet it would work very well.

[Koala]

[ATTACH]33613[/ATTACH]

If you are asking if the cable is suitable for connecting the coil to box I don't know but looks okay. You will have to try it


I have tried USB2 cables. One worked okay but felt week and the other was not stable when tapped appears that all USB2 cables are not created equal.

I now only use 4 core Van Damme microphone cable. Very flexible so unlikely to break and no false signals even when dragged through stubble or long grass.

[Koala]

Can I use Garrett gtax coil at 7 khz? Is it with capacitators inside the plate and what is inductance of rx and TX?

No idea on the specification of the coil. Might be better asking for the specs in the coil section as the chance of anyone who has measured that coil reading it on here would be small.

[golfnut]

Yof missed off the 100k which stands vertically

[Emiliano_070]

[Emiliano_070]

sounds like the coil if the phase is too far out then disc mode does not work correctly

or the LM393 have been known to cause disc problems

.hello the problem is solved by changing the LM393, thanks for your cooperation, lack of proper cable being'm with these two questions, some help I could do, thanks

[kaligula]

Can I use Garrett gtax coil at 7 khz? Is it with capacitators inside the plate and what is inductance of rx and TX?