I have now the perfect design:
Coil and holder as lightweigt as possibe, no alu but
fiberglass for complete holder.
Very lightweight display only:
You can place the blackwhite or colour LCD display at
the holder, but only the display.
Because alot MD users just love it to have a display there.
The socket for the display contains 2 connectors:
one for the coil cable and a second one for the cable
that contains the wires for the of course shielded coil
cables, the power for the display and it's data transmission
and the reset button contact.
The LCD incl. socket has to be waterproofed!
That way just a single cable is needed from the coil holder to
the hang around the neck unit.
Bungee cords are nice but disturbing - especially in woods.
However those should have to be a common accessories
standard - the same applies to a second accu-pack!
@ ivconic
Why the Blisstool LTC64 should be an improved "very old"
circuit if for shure Ahmed knew and had already the
Fisher 1266-X schematic?
There are not just some more trimmers and potis -
this is about secret ICs compared to the Fishers opamps
and of course it's an improved coil (besides the weak filling
material).
@ those to it may belong
It's absolutly mean to post some "buy cheap Blisstool
for a very low price" links here to suggest that Carl would
be the victim of "overpriced crap".
And I guess especially some italian shops have "special
connections" to get a cheaper end-customer price if you
know what I wanna say... Paying taxes sometimes there
it is the same like in Greece.
The old Blisstool LTC48 and 64 v1 have had a price of
around 500-550 Euro all over Europe as they was new
on the market. Don't forget the battery case of the LTC48
was at a different location and it had no Li-Ion pack.
At the moment the Euro / Leva is not that high compared
with the dollar so I hope Carl can get it for a better price
and if he has one of the Fisher 12xx MDs he can compare
the performance directly.
And:
Is this the culture-shock of the formerly communism
now with the open materialism aka free market economy
that some people of the eastern europe countries react that
jealous or sensitive or critical?
Don't you guys from Bulgaria or wherever think that it is
great that the products of your country are accepted worldwide,
even in the sometimes hyper-conservative United States?
Isn't it a honor for you that we from the western world like
your products and give you good money for your work?
But don't be afraid, in Germany jealosy, envy and superior
attitude is or was very common, too. The United States are
a bit more better in that case, if a person is successful there
the people like and respect that and don't create hateful thoughts.
But this is alot about culture and traditions and we must not forget
that even every country has his different little regions, towns and
villages where the people are often completly different.
Everywhere are good and bad persons and the biggest problem:
Under special circumstances or in delicate situations the worst
people could be the best and the best can became the worst!
And the same also applies to alot MDs.
That's why we have such pages as:
(click "Belgientest" on the left)
so we can compare the detection quality of alot MDs.
However there are a few parameters different under real conditions
like mineralisation degree and if you really must discriminate.
And if the Blisstool LTC64-X v3 schematic would be available
for shure certain persons here would analyse this circuit and
would tell us how good or bad this MD really must have be.
MD electronic engineers seems to be different:
Those scratch their ICs, they cover their parts with epoxy,
take "foreign" schematics and try to improve them, sell
their tools to people of countries where metal detectors
are even considered as tools to commit crime and the worst
of them construct not working "dream-machines" called LRLs!
Absolutly no wonder such "things" like here occure in this forum!
Leave a comment: