3D printed detector

[6666]

If you like to print a MMP/ Cuda ones out, I would happily share the files with you.

hi i still dont know which printer to buy, what print area is required to print your parts ?

[BKY1337]

Yes im interested , but i think i will not use it now because i have ordered aluminium enclosures.
You should upload your work at thingiverse.

[Tibuck19]

Very nice design. I like your MD Enclosure.

Will save them.

If you like to print a MMP/ Cuda ones out, I would happily share the files with you.

[Tibuck19]

nice job. hope mine will turn out as good, just waiting for printer to turn up, have used blender to make every thing up, just need the printer to turn up.

Thank you , Surprisingly enough the 3D printed detectors held out very well , The back surf pi, was one of my first and it been used a lot and banged around on rocks in fast moving waters and still all in one piece and working, it even went to Spain and back. IF it can survive flight baggage handlers, it can survive anything hahaha , the MMP has been pack and un-packed in a bag daily all summer long and looks the same today as it did when I made it! I only used ABS for 95% of the parts, and PETG for arm rest parts. If you plan your parts out right you ll be able to have something looking good and working at a fraction of the price, the only thing to keep in mind is, because it plastics, you will have to line the inside of the case with Aluminum foils and or Copper tape and ground to the board too prevent EMI interference. Good luck and share what you come up with and if you need any help or advice Just ask and ill be happy to share my thoughts.

[BKY1337]

Very nice design. I like your MD Enclosure.

Will save them.

[Chiv]

nice job. hope mine will turn out as good, just waiting for printer to turn up, have used blender to make every thing up, just need the printer to turn up.

[Tibuck19]

Link doesn't work.

https://www.dropbox.com/sh/5thzm8mxu...2mue-41Ta?dl=0 here is new link .

[Tibuck19]

Link doesn't work.

The link must be expired I will create a new one and repost.

[BKY1337]

Link doesn't work.

[Tibuck19]

Im a few years late to the party hahaha but nonetheless, here is my mostly printed metal detector. https://www.dropbox.com/sh/g8gj7aq3u...22y-3P51a?dl=0

[Prospekteur]

"very cool, i see we have thesame shoes from china"

I have them too.....one pair in green, and a second pair in a camouflage stile....my girlfriend in pink. The best allroundshoes in he world

[Tec]

I 3d printed mine .
Just kidding, they are genuine crocs !

[bernte_one]

very cool, i see we have thesame shoes from china

[6666]

Thanks Tec

[Tec]

3d printed 25cm mono coil

Attached are Instructions and 3d files to build a 25cm mono-coil.