I thought i would start a new post for the Mini Pulse plus Audio alternatives.
Before we start off i would like to quote a posting from Carl Moreland
" Welcome to the new Tech forum
The purpose of this forum is the exchange of ideas relating to the design and operational...
7 results in 0.0033 seconds.
-
MiniPulse Pluse audio options
-
Interference issue
Hey guys, I seem to be having Interference issue, I got permission to detect an older church grounds, which is next to a road that has normal street power lines running along side , and a big grey box that is used by Videotron which is one of the bigger Tv/internet/telephone providers in my area,... -
power consumption
Is it just mine or maybe my coils, But is your minipluse plus power hungry ? With 3 18650 fully charges I get about 3 hours max! of use time , as compared to my surfPi that does 8 hours easily, if not more with same 3 cells. I would also like to point out my Mini has the R7 and R8 mod which I started... -
TP2 at 7V
Hi guru's , quick question, I built the mmp D version a while ago and been using it with a fast coil, Now I wanted to make a complainer coil for It, So I pulled the board from its case and set it up on the bench to better adjust it when the coil is done, mean while, I was poking around with Scope and... -
GOLD coil hunter
Good evening Ladies and gentlemen, As some of you know I was tinkering with the Barracuda and also Polished off the Surf PI 1.2 that works like a charm with a fast 10inch coil, Now on too the MMP REV-D, I would like to make this one a GOLD hunter not only gold rings but more like a tinny gold nugget... -
MPP coil test
Hey guys,
Any one have a good educated explanation as to whether this looks good or not? (short video below)
Been messing with different damping resistors, series resistors and coil winds and finally got what I think is a pretty quick coil with the board set up and adjusted... -
Rev D Build #2 Started
Ok, figured I would get back to this little project and started a new build (1st one didn't go well for whatever reason).
I will log each step as I go here so to keep a nice record of where it is at in the process. I am still learning how to use my scope (rookie)
so may not have things...