BARACUDA-Legend-1

[mohandes]

[QUOTE=Wilson;176978]Hello Mohandes, adjust the delay as pictured.

thanks wilson
i do that but yet have problem ,have not sound!!!

mr Apberg say(many ago time) should adjust pin1 lf412 on 0volts.but how i can this?
i think wave for ne5534 not true?is it ok?

[Wilson]

Hello Mohandes, adjust the delay as pictured.

[mohandes]

Hi all
i upload my pics about the baracuda.help me.why not have sound in my detector.
i replace all mpf102 to bf245b.
and use bf256 instead 2n5485.
i use coil 451mkh and 2.2ohm.parallel res 330ohm.
i think pin 6 ne5534 not good(can not detect)ok?????????
regards






edit :
how can i adjust pin1 tl082 on 0volt, i want set it by multiturns but i can not succes.
please guid me

[bernte_one]

hello to all current baracuda builders here

here can i seta longer pulse width at th ic 40106 ? after pin9 + variable ressitor?

[Wilson]

Hello Mohandes, here in Brazil is easier to find the fet fet BF245C I replace MPF102 and 2N5485 for him, careful pinning it should be welded with 180 degree rotation.

[Wilson]

Hello Mohandes, remove the fet shown in the photo, it will work better.

[mohandes]

Hi all guru
i have ? about the SUFFIX ,A,B,C after the name of transistors?
are good BF256C Or BF256B for baracuda (which SUFFIX is better)instead MPF102??

and what the different of BF256 and BF256B??????????
thanks

[satdaveuk]

Postage cost from England to Iran is very exspensive You would have been better off takeing up 6666 kind offer and let him supply you with parts required.
This thread has gone stale and boring due to the same repeated questions, and I for one has put a lid on it .
Please can we get back to some normality here.

[6666]

Mohandes
you asked people to help you to get some components,
I offered to post you some at the retail price I have to pay at my local electronics shop.

My local shop cannot match the price you can buy them for from http://www.taydaelectronics.com/mpf1...ransistor.html.
so you will have to get them from TaydaElectronics.com.

When you buy from TaydaElectronics.com be aware they have a USA $5.00 minimum purchase,
plus shipping,
You can see shipping costs and available shipping methods to your country using "Estimate Shipping Cost" box in your shopping cart.

Good luck

[mohandes]

no body here....

[mohandes]

Mohandes are you saying you dont want me to send you the parts ?

first thanks mr starmol my friendmr 6666 look this site http://www.taydaelectronics.com/mpf1...ransistor.html MPF102 is 0.45$(equal 1500Toman for iranian)2N5485 is 0.28$ .BF256 and BF244 are 0.24$can you send me these transistor by these price>thanks

[6666]

Mohandes are you saying you dont want me to send you the parts ?

[starmoml]

2n3819=download this part list

[mohandes]

You can order the replacement parts and other from this company, looks like they will ship to Iran.
http://www.taydaelectronics.com/mpf1...ransistor.html

Hi mohades,
do not get angry but must have a basic knowledge of electronics... one element wrong direction or cold solder or... and the detector will not work!

Mohandes
what transistor do you need ?
if its a mpf102 I can post some to you, they are Australian $1.50 each
the postage would be about Australian $3.00

Hi all
thanks
Mr sven1 ,thank you very very much.
mr 6666 it is to muh for me/
mr maikl all is ok.i get the all out put, but mr alex ay 2n3819 not work.
regards

[maikl]

Hi mohades,
do not get angry but must have a basic knowledge of electronics... one element wrong direction or cold solder or... and the detector will not work!