Announcement

Collapse
No announcement yet.

Threshold Pot doesn't work

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Carl-NC
    replied
    Does your RG59 have a solid center conductor or stranded?

    Leave a comment:


  • h9361
    replied
    Originally posted by pito View Post
    SVGA Monitor Cable
    Click image for larger version

Name:	image.png
Views:	302
Size:	452.8 KB
ID:	419428​
    Thank you dear Pito

    Leave a comment:


  • pito
    replied
    SVGA Monitor Cable
    Click image for larger version

Name:	image.png
Views:	302
Size:	452.8 KB
ID:	419428​

    Leave a comment:


  • h9361
    replied
    Originally posted by Carl-NC View Post
    Does it have a solid center conductor or stranded?

    Generally, you want a coax with a stranded center conductor and a high characteristic impedance. The cable I use is custom made for the company I work for.
    Thank you.
    Do you have any suggestion (cable) for DD coil?

    Leave a comment:


  • Carl-NC
    replied
    Does it have a solid center conductor or stranded?

    Generally, you want a coax with a stranded center conductor and a high characteristic impedance. The cable I use is custom made for the company I work for.

    Leave a comment:


  • h9361
    replied
    Originally posted by Carl-NC View Post
    New thread, please. There is a Voodoo-specific forum.
    As soon as connecting shield, the cables will destroy my TP4.
    Only the RG59 keep TP4 very nicely.

    Leave a comment:


  • h9361
    replied
    Originally posted by Carl-NC View Post
    New thread, please. There is a Voodoo-specific forum.
    Hello
    Dear Carl
    I hope you are in a good health.
    About building Coil, i tested many cables for connecting Coil to unit. The best result was with RG59.
    But as you know, the cable is not flexible. Since you have a lot of experience in this field, can you introduce me some good cables for this?
    Thank you.

    Leave a comment:


  • Carl-NC
    replied
    New thread, please. There is a Voodoo-specific forum.

    Leave a comment:


  • h9361
    replied
    Originally posted by Carl View Post
    Yes, the ground channel needs to match the target channel.
    Before everything, i need to thank you for your tips and help.
    After a lot of trying, now my HHD (motion mode) works very very nice with GB and over 3.7-4.2 pps.
    Now, i want to develop Voodoo project. Now, i edited its code for producing 4 delays.
    Do you think i continue this on the thread or i should make a new?

    Leave a comment:


  • h9361
    replied
    Originally posted by Carl-NC View Post
    Yes, the ground channel needs to match the target channel.
    Hello
    Dear Carl
    First, thank you for your supporting and my amatory questions.
    First see attached, it is my GB part schematic:
    Click image for larger version

Name:	GBmain2.jpg
Views:	388
Size:	279.7 KB
ID:	414801
    Now, see my Delay chart as follows,

    Click image for larger version

Name:	tp4-del1.jpg
Views:	291
Size:	119.0 KB
ID:	414802
    TP4 and Del1 (main delay)= 8uS


    Click image for larger version

Name:	del1-del2.jpg
Views:	295
Size:	122.1 KB
ID:	414803
    Del1 and Del2 (GB delay)=4-5 uS

    Click image for larger version

Name:	del2-del3.jpg
Views:	287
Size:	117.4 KB
ID:	414804
    Del2 and Del3 (first EE)= 150uS

    Click image for larger version

Name:	del3-del4.jpg
Views:	296
Size:	120.3 KB
ID:	414805
    Del3 and Del4 (second EE)=10uS

    But my GB pot is not working. The only model that it works, i increased Del3 and Del4 (both EE delay) so that Del4 went out of my time period (over next TP4 pulse).
    See it, it is my Del4 (second EE) and next TP4 pulse.
    Click image for larger version

Name:	del4-next-tp4.jpg
Views:	294
Size:	120.3 KB
ID:	414806

    All of my measurement was based on a 45cm coil (litz, i tested the coil over GPX5000 and works very nice). But my HHD-GB work very nice if i change my coil to 8cm with inductance 500uH.

    Do you have any suggestion for testing and solving my GB problem?
    Please forgive me for my questions.

    Leave a comment:


  • h9361
    replied
    Originally posted by Carl-NC View Post
    Yes, the ground channel needs to match the target channel.
    Hello
    Dear Carl.
    Thank you for your guidance.
    After changing TAU capacitors, my main channel output (IC8-pin7) is good form.
    In addition, gain of my main channel also was high and i changed to 1.
    But see my ground channel form, do you think it is normal?
    I measured results with a connected coil over ground (free metal)
    Click image for larger version  Name:	scop.jpg Views:	0 Size:	134.0 KB ID:	414511
    I change my ground channel gain (GB pot), you can see its form in follow
    Click image for larger version

Name:	scop1.jpg
Views:	286
Size:	137.8 KB
ID:	414512

    Leave a comment:


  • Carl-NC
    replied
    Yes, the ground channel needs to match the target channel.

    Leave a comment:


  • h9361
    replied
    Originally posted by Carl-NC View Post
    R64-C21 and R49-C20 set the tau of the integrator. Try increasing C20 and C21 to 470nF (also C22,C23), your ripple should decrease but your target response speed will be slower.
    Thank you.
    I will test and share my result.
    Do you think i should also increase or decrease C22 and C23 (GB channel)?

    Leave a comment:


  • Carl-NC
    replied
    R64-C21 and R49-C20 set the tau of the integrator. Try increasing C20 and C21 to 470nF (also C22,C23), your ripple should decrease but your target response speed will be slower.

    Leave a comment:


  • h9361
    replied
    Originally posted by Carl-NC View Post

    IC8 has a gain of 100 so you will need to increase the oscope sensitivity to 50mV/div to get an equivalent measurement. Did you do that? I suspect you will see the same problem and that it is just a normal integrator waveform. This means you either have too much gain in IC8 or not a high enough integration tau.
    Thank you for your response.
    Is is possible to tell me definition of tau?
    I will measure the result with 50mV/div and share here.
    For another test, i will decrease gain of IC8 (value of R53).
    About tau, is your mean that i should play (increase gain) with R64-R47/R49-48 (attached)?
    I forgot to tell you, my frequency is 2.6KHz.
    Click image for larger version  Name:	GBmain2.jpg Views:	0 Size:	304.1 KB ID:	414484

    Leave a comment:

Working...
X